SP0901 Oil Sump, automatic transmission (BGA OE-Spec Replacement)

The SP0901 Oil Sump, automatic transmission is a BGA oil sump & filter listed under our
Oil Sump & Filter category at
CG Auto Parts Shop. Every listing includes a full manufacturer cross-reference
table so you can confirm fitment by part number before you order.

How It Works

The oil sump (pan) is the reservoir at the base of the engine that holds the full oil charge when the engine is at rest, while the oil filter removes metallic particles, carbon deposits, and combustion byproducts before clean oil is pumped back to the engine’s bearings, camshaft journals, and valve train. Together, an intact sump and a serviceable filter are what prevent catastrophic lubrication failure.

Signs You Need a Replacement

Oil leaks from a cracked, dented, or corroded sump, or a leaking gasket at the pan-to-block joint. A clogged filter that forces the bypass valve open allows unfiltered oil to circulate. Oil pressure warning light illumination on a fully filled engine demands immediate investigation.

Brand & Manufacturing Authority

This oil sump & filter is manufactured by BGA, a recognised supplier
to the automotive aftermarket. The part number SP0901 identifies this specific
unit in the manufacturer’s own catalog. It is supplied new — not remanufactured — and is backed by our
warranty policy.

Material & Construction

Built from stamped steel or cast aluminium pan body with a machined gasket face; gasket in formed rubber or MLS material matching the engine block’s surface finish requirements. This construction is chosen to match or exceed the OE
specification it replaces under the same load, temperature, and service conditions.

Fitment Confidence

Year-make-model filters alone can miss mid-year production changes that affect fitment. The safest
method is to match the part number stamped on your existing oil sump & filter against the
cross-reference table below. If you can’t locate your existing part number, send your vehicle VIN
through our contact page and we’ll confirm before you order.

Product Specifications

Cross-Reference Compatibility Table

Match your existing part number against this table before ordering. All data is drawn directly
from the manufacturer’s own cross-reference documentation.

SP0901 Oil Sump Installation & Safety Notes

Replace the drain plug crush washer and pan gasket every time the sump is removed. Follow the torque sequence specified in the workshop manual — over-tightening pan bolts is the most common cause of a new sump leak. Always follow your vehicle manufacturer’s torque specifications and service
manual procedure. For the engineering standards that govern this part category, see the
API engine service standards.

Quality Assurance

We verify every listing’s cross-reference data against the manufacturer’s own catalog before
publishing. We sell BGA parts because the brand has a documented track record in the
oil sump & filter category. If a part number doesn’t match your vehicle after
checking the table above, contact us and we’ll find the correct one.

Shipping, Returns & Warranty

Orders ship from our US warehouse. Delivery windows are on our
shipping policy page. If a part arrives damaged or doesn’t fit,
the return and claim process is in our terms of service and
warranty policy. Questions?
Contact us any time.

Why Buy From CG Auto Parts Shop

• Genuine BGA part, cross-referenced by manufacturer part number
• New condition — never remanufactured or reconditioned
• Backed by our warranty policy
• Fast US shipping — see shipping policy for timelines
• Fitment support — contact us with your VIN before ordering
• Transparent part numbers — no guesswork, no hidden cross-brand substitutions

Related Products in This Category

Browse more Oil Sump & Filter parts, or explore the
full shop. More parts in this category include:

• 55399 Oil Sump, automatic transmission (SKU 55399)
• FSF-BM-002 Oil Sump, automatic transmission (SKU FSF-BM-002)
• 5961.303.474 Oil Sump, automatic transmission (SKU 5961.303.474)
• 96SKV414 Plug Housing, automatic transmission control unit (SKU 96SKV414)

Choosing the Right Oil Sump & Filter — A Buyer’s Guide

Shopping for a oil sump & filter by part number rather than by vehicle
model alone is the most reliable way to avoid a fitment mismatch. A year-make-model filter is a
starting point, but the same vehicle model can use different component specifications depending on
trim level, engine variant, and production date. The cross-reference table above is built from
the manufacturer’s own part-number data, which means the relationship between this part and the
vehicle application is confirmed at the component level rather than inferred from model data.

When you receive the new oil sump & filter, compare it physically against
the old part before installation — check overall dimensions, mounting hole positions, and connector
orientation. A direct visual comparison catches any discrepancy before time is invested in
disassembly. If anything doesn’t match despite the part number confirming correctly, contact us
before installing, since we can usually resolve fitment questions the same day.

We source our BGA parts directly through authorised supply
channels to ensure you receive the genuine part that the cross-reference table confirms. Aftermarket
quality varies enormously by brand; listing the actual manufacturer — rather than a generic
“compatible with” label — is how we give you the information needed to make a confident buying
decision. The About Us page explains our approach to sourcing and
part-number verification in more detail.

After Installation — What to Check

Once the new oil sump & filter is fitted and torqued to specification,
a brief test drive under controlled conditions is the best way to confirm the repair is successful
before returning the vehicle to normal use. Listen for any new noises from the affected area at low
speed over a rough surface, and confirm that the system behaviour feels correct. For suspension and
steering components, a wheel alignment check immediately after installation is strongly recommended,
since even a correctly fitted new part can require alignment correction compared to the worn part
it replaced. For braking components, a proper bed-in procedure — a series of graduated stops from
road speed — transfers an even layer of friction material and settles the new components before
maximum braking loads are applied.

Keep the installation date and part number noted in your service records. This information is
required if a warranty claim becomes necessary, and it makes future parts sourcing straightforward
since you’ll have a confirmed part number on file. Our warranty
policy page specifies the documentation needed to support a claim.

Frequently Asked Questions about SP0901 Oil Sump

Will this part fit my vehicle?

Match the part number on your existing oil sump & filter against the
cross-reference table on this page. If you’re unsure, send your VIN through our
contact page.

What brand is SP0901 Oil Sump?

This is a BGA part, confirmed by matching SKU
SP0901 in the manufacturer’s cross-reference data.

Is this SP0901 Oil Sump a new part or remanufactured?

New condition. All parts in our shop are new — no remanufactured
or reconditioned units.

How long does shipping take?

See our shipping policy for current carrier options and
delivery windows from our US warehouse.

What warranty does this SP0901 Oil Sump carry?

Coverage terms are detailed on our warranty policy page.

Helpful Links

Home ·
Shop ·
Oil Sump & Filter ·
About Us · FAQ · Shipping Policy · Warranty Policy · Terms of Service · Contact Us