Sachs 900 126 Dust Cover Kit Rear

If you’re shopping for a Sachs 900 126 dust cover kit, you’re looking at a direct-fit replacement part designed for the rear axle. This dust cover kit shields the shock absorber’s piston rod and seal from dirt, road salt, moisture, and debris that can cause premature wear or leaking. Worn, cracked, or missing suspension boots and buffers are a common cause of premature shock absorber failure, so replacing this part promptly protects the more expensive components around it. Order your Sachs 900 126 today and get it shipped straight to your door.

## Why This Dust Cover Kit Matters

A suspension system is only as good as its smallest parts. The dust cover kit may be inexpensive compared to a full shock absorber or strut, but its job — keeping dirt, moisture, and road debris off the working parts of your suspension — has an outsized effect on how long those bigger, costlier components last. Here’s what this Sachs 900 126 brings to the job:

– **Direct-fit replacement** — manufactured to match the fitment of the original component for rear axle
– **Protects surrounding components** — a dust cover kit in good condition helps the rest of the suspension assembly around it last longer
– **Straightforward installation** — designed to install using standard hand tools in a typical DIY suspension job
– **Reduces noise and harshness** — a properly fitted dust cover kit cuts down on clunks and rattles from worn suspension rubber
– **Backed by Sachs** — a long-established German brand known for chassis and damping components, with deep roots in original-equipment shock absorber and clutch technology

Whether you’re doing routine preventive maintenance or replacing a part that’s already failed, installing a quality dust cover kit now is far cheaper than replacing a damaged shock absorber later.

## Specifications & Technical Details

This listing is for **Sachs part number 900 126**, categorized by the manufacturer as a dust cover kit for the **Rear Axle**. Key specifications as provided by Sachs:

| Attribute | Value |
|—|—|
| EAN | 4013872600977 |
| Model | Service Kit |
| Quantity per axle | 1 |

EAN: **4013872600977** — use this number, alongside the part number, to cross-check fitment against your vehicle’s existing part before ordering.

Always confirm fitment against your vehicle’s VIN or your current part’s number where possible, since suspension components frequently vary by trim, chassis code, and production date even within the same model.

## Use Cases & Applications

This dust cover kit is most commonly installed during:

– **Shock absorber or strut replacement** — many installers replace the dust cover kit at the same time as the shock absorber itself, since both wear out on a similar timeline
– **Suspension noise diagnosis** — a torn or missing dust cover kit is a frequent source of clunking or rattling noises over bumps
– **Preventive maintenance** — replacing a cracked or perished dust cover kit before it fails protects the shock absorber rod from dirt and moisture ingress
– **Post-inspection repair** — if a routine inspection or state safety check flags a damaged suspension boot or buffer, this part addresses that finding directly

This part is relevant to drivers anywhere in the country — from winter road-salt conditions in the Northeast and Midwest to dusty, high-mileage driving in the Southwest — since contamination protection matters regardless of climate. We ship this dust cover kit to all 50 states.

## Quality & Sourcing

This part is supplied by **Sachs**, a long-established German brand known for chassis and damping components, with deep roots in original-equipment shock absorber and clutch technology. The part number and EAN listed on this page correspond directly to Sachs’s own catalog listing for this component, so you can cross-reference specifications directly with the manufacturer if needed.

As with any aftermarket suspension part, we recommend visually inspecting the part on arrival and confirming the part number matches your original component before installation. For more on our sourcing and quality standards, see our [About Us](https://cgautopartsshop.com/about-us/) page.

## Shipping & Delivery

We ship this Sachs 900 126 dust cover kit to customers in all 50 US states. Standard delivery typically takes 3-7 business days depending on your location, with faster options available at checkout. See our full [Shipping Policy](https://cgautopartsshop.com/shipping-policy/) for state-by-state delivery estimates and carrier information.

## Buying With Confidence

We list the manufacturer part number and EAN for every suspension component we carry so you can verify fitment before you buy, not after. If you’re unsure whether this dust cover kit matches your vehicle, our team is available through our [Contact Us](https://cgautopartsshop.com/contact-us/) page before you place an order. Full terms, including our return window for unused parts, are on our [Terms of Service](https://cgautopartsshop.com/terms-of-service/) page, and warranty information is on our [Warranty Policy](https://cgautopartsshop.com/warranty-policy/) page. Reviews for this listing will appear below as customers purchase and install this part.

## Frequently Asked Questions

### What does a dust cover kit do?

A dust cover kit is a suspension wear part. It shields the shock absorber’s piston rod and seal from dirt, road salt, moisture, and debris that can cause premature wear or leaking. Replacing a worn or damaged one helps protect the more expensive shock absorber or strut it’s paired with, and keeps the suspension performing the way the vehicle manufacturer intended.

### Is this Sachs 900 126 compatible with my vehicle?

Fitment for suspension components like this one depends on the exact make, model, model year, and sometimes trim or chassis code. We recommend checking your vehicle’s details against the EAN/part number listed on this page, or contacting our team at [Contact Us](https://cgautopartsshop.com/contact-us/) before ordering if you’re not sure.

### Do I need to replace the dust cover kit in pairs?

Most installers replace suspension boots, dust covers, and buffers on both sides of an axle at the same time, even if only one side has failed, since the opposite side is usually close behind in wear. Whether that applies to your vehicle depends on your specific inspection findings.

### What’s included with this dust cover kit?

This listing includes the dust cover kit itself as supplied by Sachs, part number 900 126. Some kits include additional small components such as retaining clips; check the fitting position and specifications listed above for this specific part.

### How long does shipping take?

Orders ship from our US warehouse network to all 50 states. Typical delivery is 3-7 business days depending on your location; expedited options are available at checkout. Full details are on our [Shipping Policy](https://cgautopartsshop.com/shipping-policy/) page.

### What’s your return policy on suspension parts?

We accept returns on unused, uninstalled parts in original packaging within the window described on our [Terms of Service](https://cgautopartsshop.com/terms-of-service/) page. Because this is a mechanical wear part, we recommend confirming fitment before installation.

### Is Sachs a reliable brand for this type of part?

Sachs is a long-established German brand known for chassis and damping components, with deep roots in original-equipment shock absorber and clutch technology. As with any aftermarket supplier, we recommend matching the exact part number and EAN to your vehicle’s requirements rather than relying on brand name alone.

### Can I install this myself, or do I need a mechanic?

Replacing a dust cover kit is a common DIY suspension job for someone comfortable working with jack stands, a spring compressor (where applicable), and basic hand tools. If you’re not confident working under a loaded suspension, we recommend having a qualified technician handle the installation.

### What signs indicate my old dust cover kit needs replacing?

Common signs include visible cracking, tearing, or perishing of the rubber, a clunking noise over bumps, or dirt/moisture visibly reaching the shock absorber rod. A torn dust cover or boot is often found during a routine suspension inspection.

## Related Products & Resources

Often purchased alongside this part: [Kyb 910049 Dust Cover Kit](https://cgautopartsshop.com/product/kyb-910049-dust-cover-kit/), [Meyle 514 640 0001 Dust Cover Kit](https://cgautopartsshop.com/product/meyle-514-640-0001-dust-cover-kit/), [Kyb 910084 Dust Cover Kit](https://cgautopartsshop.com/product/kyb-910084-dust-cover-kit/), [Maxgear 72-3518 Dust Cover Kit](https://cgautopartsshop.com/product/maxgear-72-3518-dust-cover-kit/). Browse the full [Shock Absorber Dust Covers](https://cgautopartsshop.com/product-category/shock-absorber-dust-covers/) category, or explore [Shop All Parts](https://cgautopartsshop.com/shop/).

For general background reading, see [automobile suspension systems](https://en.wikipedia.org/wiki/Car_suspension) and [NHTSA vehicle safety information](https://www.nhtsa.gov/).