MAXGEAR 19-3261 Splash Panel
$15.99
Genuine-fit MAXGEAR 19-3261 splash panel — shields your brake disc from debris and corrosion. Ships nationwide, order now.
A damaged or corroded splash panel exposes your brake disc to road debris, water, and mud, accelerating rotor wear and reducing braking performance over time. The MAXGEAR 19-3261 splash panel restores the protective barrier between your brake disc and the elements, engineered as a direct OE-fit replacement.
Key Benefits
The MAXGEAR 19-3261 splash panel is manufactured to restore rotor protection and OE fitment. Here’s what this replacement part offers:
- Corrosion-resistant material designed to hold up to road salt, moisture, and temperature extremes across all climates.
- Improved brake system longevity by reducing the debris exposure that contributes to premature rotor and pad wear.
- OE-matching fitment engineered to MAXGEAR 19-3261’s exact mounting dimensions for a precise, direct-fit installation.
- MAXGEAR manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.
- Rotor protection that shields the brake disc from road debris, mud, and standing water, helping reduce uneven wear and corrosion.
- Precise axle-specific design, manufactured for the correct side and position so it bolts in without adjustment.
Product Specifications
Every MAXGEAR 19-3261 splash panel is manufactured to precise dimensional tolerances to match OE mounting points. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.
| Brand | MAXGEAR |
| Manufacturer Part Number | 19-3261 |
| Axle Position | Rear Axle Right |
| For Brake Disc Diameter | 294 |
| Paired Article Number | 19-3260 |
| Product Line | Budget |
| Price (USD) | $15.99 |
MAXGEAR is an aftermarket brand focused on precision-engineered body and brake components manufactured to strict quality-control standards.
Use Cases and Applications
This splash panel is suited for routine brake service, rust repair, and restoring rotor protection after an original panel has corroded or been damaged. Typical scenarios where drivers choose this part include:
- Replacing a rusted-through or cracked splash panel discovered during a brake job or rotation.
- Restoring OE rotor protection after off-road driving or exposure to heavy road salt.
- Addressing a rattling or scraping noise caused by a loose or damaged splash panel contacting the rotor.
- Completing a full brake system refresh alongside new pads, rotors, or calipers.
Because splash panels are manufactured for a specific axle position and side, this part is intended as a direct match for the axle position listed in the specifications — always confirm fitment against your vehicle’s OE part number and axle position before ordering. Replacing a damaged splash panel promptly helps prevent it from contacting and scoring the rotor surface, which can turn a low-cost repair into a more expensive one.
Quality Assurance and Certifications
MAXGEAR is an aftermarket brand focused on precision-engineered body and brake components manufactured to strict quality-control standards. Each MAXGEAR 19-3261 unit undergoes manufacturer quality control testing for dimensional accuracy and corrosion resistance before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as disc brake system design and components.
Shipping and Delivery
We ship the MAXGEAR 19-3261 splash panel to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full brake parts shop for related components.
What Customers Are Saying
“”My old splash panel had rusted through completely. The MAXGEAR 19-3261 fit right in and the scraping noise is gone.” — Owen, Charlotte, NC
“”Cheap fix for what could have been a bigger rotor problem. Fit was exact, no trimming needed.” — Derek, Boise, ID
Individual results may vary based on vehicle condition and installation quality.
Frequently Asked Questions
What symptoms indicate a damaged or failing splash panel?
Common symptoms include a rattling or scraping noise near the wheel (especially when turning), visible rust-through or cracking, and a splash panel that’s bent or contacting the rotor.
What is the EAN for the MAXGEAR 19-3261?
EAN details for the MAXGEAR 19-3261 are listed in the specifications table above where available.
Is this a direct OE replacement?
Yes. The MAXGEAR 19-3261 is engineered to match the mounting points and dimensions of the original equipment splash panel, so no modification is required for installation.
Does this splash panel come with a warranty?
Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.
Do I need to replace the splash panel in pairs?
This splash panel has a paired counterpart (part number 19-3260) for the opposite side. Many installers replace both sides together for even wear and protection, though it isn’t strictly required unless the other side is also damaged.
Why is this part priced at $15.99?
Pricing reflects the MAXGEAR brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.
Which axle position does this splash panel fit?
The MAXGEAR 19-3261 is manufactured for the Rear Axle Right position. Check the specifications table above and confirm against your vehicle’s OE part number before ordering.
What is your return policy on this part?
Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.
How long does shipping take?
Orders ship nationwide to all 50 U.S. states. Standard delivery typically takes 3–7 business days depending on your location; expedited options are available at checkout. Full details are on our shipping policy page.
What vehicles is this splash panel compatible with?
This MAXGEAR 19-3261 splash panel is manufactured to fit its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.
Do you ship to my state?
Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.
Related Parts and Resources
- Browse our full brake parts catalog
- MAXGEAR 19-3260 Splash Panel
- MAXGEAR 19-3269 Splash Panel
- KLOKKERHOLM 1617378 Splash Panel
- KLOKKERHOLM 0029377 Splash Panel
- KLOKKERHOLM 9568870 Splash Panel
- Warranty policy
- Shipping policy
- General FAQ
- About CG Auto Parts Shop
For general background on brake system design, see disc brake system design and components and NHTSA brake and chassis safety guidance.
| Axle Position | Rear Axle Right |
|---|
Only logged in customers who have purchased this product may leave a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.