Magnum Technology A9W002MT Shock Boot Front

If you’re shopping for a Magnum Technology A9W002MT protective cap/bellow (shock boot), you’re looking at a direct-fit replacement part designed for the front axle. This protective cap/bellow (shock boot) covers and protects the exposed shaft of the shock absorber or strut, absorbing minor road debris impact and keeping contaminants off the rod. Worn, cracked, or missing suspension boots and buffers are a common cause of premature shock absorber failure, so replacing this part promptly protects the more expensive components around it. Order your Magnum Technology A9W002MT today and get it shipped straight to your door.

## Why This Shock Boot Matters

A suspension system is only as good as its smallest parts. The protective cap/bellow (shock boot) may be inexpensive compared to a full shock absorber or strut, but its job — keeping dirt, moisture, and road debris off the working parts of your suspension — has an outsized effect on how long those bigger, costlier components last. Here’s what this Magnum Technology A9W002MT brings to the job:

– **Direct-fit replacement** — manufactured to match the fitment of the original component for front axle
– **Protects surrounding components** — a shock boot in good condition helps the rest of the suspension assembly around it last longer
– **Straightforward installation** — designed to install using standard hand tools in a typical DIY suspension job
– **Reduces noise and harshness** — a properly fitted shock boot cuts down on clunks and rattles from worn suspension rubber
– **Backed by Magnum Technology** — an aftermarket manufacturer producing suspension and chassis replacement parts engineered to OE-comparable specifications

Whether you’re doing routine preventive maintenance or replacing a part that’s already failed, installing a quality shock boot now is far cheaper than replacing a damaged shock absorber later.

## Specifications & Technical Details

This listing is for **Magnum Technology part number A9W002MT**, categorized by the manufacturer as a protective cap/bellow (shock boot) for the **Front Axle**. Key specifications as provided by Magnum Technology:

| Attribute | Value |
|—|—|
| EAN | 5900427320437 |
| Thickness [mm] | 225 |
| Height [mm] | 225 |

EAN: **5900427320437** — use this number, alongside the part number, to cross-check fitment against your vehicle’s existing part before ordering.

Always confirm fitment against your vehicle’s VIN or your current part’s number where possible, since suspension components frequently vary by trim, chassis code, and production date even within the same model.

## Use Cases & Applications

This protective cap/bellow (shock boot) is most commonly installed during:

– **Shock absorber or strut replacement** — many installers replace the shock boot at the same time as the shock absorber itself, since both wear out on a similar timeline
– **Suspension noise diagnosis** — a torn or missing shock boot is a frequent source of clunking or rattling noises over bumps
– **Preventive maintenance** — replacing a cracked or perished shock boot before it fails protects the shock absorber rod from dirt and moisture ingress
– **Post-inspection repair** — if a routine inspection or state safety check flags a damaged suspension boot or buffer, this part addresses that finding directly

This part is relevant to drivers anywhere in the country — from winter road-salt conditions in the Northeast and Midwest to dusty, high-mileage driving in the Southwest — since contamination protection matters regardless of climate. We ship this shock boot to all 50 states.

## Quality & Sourcing

This part is supplied by **Magnum Technology**, an aftermarket manufacturer producing suspension and chassis replacement parts engineered to OE-comparable specifications. The part number and EAN listed on this page correspond directly to Magnum Technology’s own catalog listing for this component, so you can cross-reference specifications directly with the manufacturer if needed.

As with any aftermarket suspension part, we recommend visually inspecting the part on arrival and confirming the part number matches your original component before installation. For more on our sourcing and quality standards, see our [About Us](https://cgautopartsshop.com/about-us/) page.

## Shipping & Delivery

We ship this Magnum Technology A9W002MT protective cap/bellow (shock boot) to customers in all 50 US states. Standard delivery typically takes 3-7 business days depending on your location, with faster options available at checkout. See our full [Shipping Policy](https://cgautopartsshop.com/shipping-policy/) for state-by-state delivery estimates and carrier information.

## Buying With Confidence

We list the manufacturer part number and EAN for every suspension component we carry so you can verify fitment before you buy, not after. If you’re unsure whether this shock boot matches your vehicle, our team is available through our [Contact Us](https://cgautopartsshop.com/contact-us/) page before you place an order. Full terms, including our return window for unused parts, are on our [Terms of Service](https://cgautopartsshop.com/terms-of-service/) page, and warranty information is on our [Warranty Policy](https://cgautopartsshop.com/warranty-policy/) page. Reviews for this listing will appear below as customers purchase and install this part.

## Frequently Asked Questions

### What does a protective cap/bellow (shock boot) do?

A protective cap/bellow (shock boot) is a suspension wear part. It covers and protects the exposed shaft of the shock absorber or strut, absorbing minor road debris impact and keeping contaminants off the rod. Replacing a worn or damaged one helps protect the more expensive shock absorber or strut it’s paired with, and keeps the suspension performing the way the vehicle manufacturer intended.

### Is this Magnum Technology A9W002MT compatible with my vehicle?

Fitment for suspension components like this one depends on the exact make, model, model year, and sometimes trim or chassis code. We recommend checking your vehicle’s details against the EAN/part number listed on this page, or contacting our team at [Contact Us](https://cgautopartsshop.com/contact-us/) before ordering if you’re not sure.

### Do I need to replace the shock boot in pairs?

Most installers replace suspension boots, dust covers, and buffers on both sides of an axle at the same time, even if only one side has failed, since the opposite side is usually close behind in wear. Whether that applies to your vehicle depends on your specific inspection findings.

### What’s included with this shock boot?

This listing includes the protective cap/bellow (shock boot) itself as supplied by Magnum Technology, part number A9W002MT. Some kits include additional small components such as retaining clips; check the fitting position and specifications listed above for this specific part.

### How long does shipping take?

Orders ship from our US warehouse network to all 50 states. Typical delivery is 3-7 business days depending on your location; expedited options are available at checkout. Full details are on our [Shipping Policy](https://cgautopartsshop.com/shipping-policy/) page.

### What’s your return policy on suspension parts?

We accept returns on unused, uninstalled parts in original packaging within the window described on our [Terms of Service](https://cgautopartsshop.com/terms-of-service/) page. Because this is a mechanical wear part, we recommend confirming fitment before installation.

### Is Magnum Technology a reliable brand for this type of part?

Magnum Technology is an aftermarket manufacturer producing suspension and chassis replacement parts engineered to OE-comparable specifications. As with any aftermarket supplier, we recommend matching the exact part number and EAN to your vehicle’s requirements rather than relying on brand name alone.

### Can I install this myself, or do I need a mechanic?

Replacing a shock boot is a common DIY suspension job for someone comfortable working with jack stands, a spring compressor (where applicable), and basic hand tools. If you’re not confident working under a loaded suspension, we recommend having a qualified technician handle the installation.

### What signs indicate my old shock boot needs replacing?

Common signs include visible cracking, tearing, or perishing of the rubber, a clunking noise over bumps, or dirt/moisture visibly reaching the shock absorber rod. A torn dust cover or boot is often found during a routine suspension inspection.

## Related Products & Resources

Often purchased alongside this part: [Febi Bilstein 22142 Shock Boot](https://cgautopartsshop.com/product/febi-bilstein-22142-shock-boot/), [Febest TSHB-ACA2F Shock Boot](https://cgautopartsshop.com/product/febest-tshb-aca2f-shock-boot/), [Maxgear 72-1708 Shock Boot](https://cgautopartsshop.com/product/maxgear-72-1708-shock-boot/), [Febi Bilstein 28529 Shock Boot](https://cgautopartsshop.com/product/febi-bilstein-28529-shock-boot/). Browse the full [Shock Absorber Boots & Bellows](https://cgautopartsshop.com/product-category/shock-absorber-boots-bellows/) category, or explore [Shop All Parts](https://cgautopartsshop.com/shop/).

For general background reading, see [automobile suspension systems](https://en.wikipedia.org/wiki/Car_suspension) and [NHTSA vehicle safety information](https://www.nhtsa.gov/).