LuK Clutch Kit 600 0017 00

A clutch kit is only as good as the tolerances it’s built to. The LuK 600 0017 00 matches original equipment specifications, giving you a dual-mass flywheel clutch kit designed to restore smooth pedal feel and clean gear engagement.

Key Benefits

What stands out about this particular kit:

• Retains the factory dual-mass flywheel design for the smoother idle and lower drivetrain vibration it was engineered to deliver
• Includes the central/concentric slave cylinder, so the hydraulic release mechanism is replaced alongside the friction components
• Single part-number kit that bundles the components that wear together, cutting down on repeat labor and comeback repairs
• Sourced from LuK, an established name in clutch and drivetrain components

What’s In The Box

• Brand: LuK
• Part / Model Number: 600 0017 00
• EAN/Barcode: 4005108558459
• Model: LuK RepSet DMF
• Supplementary Article/Supplementary Info: with central slave cylinder
• Supplementary Article/Supplementary Info 2: with flywheel, with screw set

Because clutch kits are matched to exact drivetrain tolerances, always verify fitment using the EAN/barcode or part number above rather than the vehicle make and model alone — the same car can ship from the factory with more than one clutch specification depending on engine, transmission, and production year. If you’re cross-shopping, our full clutch kit selection lets you compare diameter, tooth count, and hub profile side by side before you commit to a part number.

Application & Use Case

This kit is designed for vehicles that use a dual-mass flywheel from the factory and need the full clutch and flywheel assembly replaced as a set. Replacing only the friction disc on a dual-mass setup without addressing the flywheel is a common mistake that leads to a repeat failure — this kit is bundled specifically to avoid that outcome.

Typical symptoms that point to needing this kit include slipping under load or acceleration, a burning smell after hard driving, a spongy or vibrating clutch pedal, difficulty selecting gears, or a pedal that no longer engages at a consistent point. If you’re seeing these symptoms, confirm the 600 0017 00 matches your vehicle’s original part number before ordering — clutch kits are vehicle- and engine-specific, and an incorrect diameter or tooth count will not install correctly.

Installation Overview

A clutch kit replacement is a transmission-out job on nearly every vehicle: the drivetrain is disconnected, the transmission is removed to expose the clutch assembly, the old disc, pressure plate, flywheel, and release bearing come out as a set, and the new 600 0017 00 components go in following the torque sequence and alignment procedure in your vehicle’s factory service manual. A clutch alignment tool is used to center the new disc on the flywheel before the pressure plate is torqued down, and the flywheel bolts are torqued to spec before the clutch is installed on top of it. Because this work involves the transmission, drivetrain, and in some cases the hydraulic release system, it’s worth budgeting real shop time for it rather than treating it as a quick swap — rushing clutch alignment is one of the more common causes of a comeback repair.

Quality & Manufacturing Standards

Component suppliers in this category — LuK included — typically manufacture under IATF 16949-aligned quality systems, the automotive industry’s standard for consistent, defect-controlled production. That’s the same quality framework used across most OE-grade component lines, not a claim unique to any one part number. LuK is a clutch systems brand of the Schaeffler Group, credited as a pioneer of the modern diaphragm-spring clutch design used across millions of vehicles built on OE production lines.

Shipping & Delivery

This kit ships from our US warehouse network to all 50 states. Order processing and transit times are listed on our shipping policy. Every order includes tracking, and our contact team can help if you need it faster for a vehicle that’s currently off the road.

Support, Warranty & Returns

We stand behind what we sell: review our warranty policy and terms of service before you buy, browse our FAQ page for common fitment and shipping questions, or contact us directly if you have a question this listing doesn’t answer. You can also browse our full clutch kit selection to compare this kit against other options for your vehicle. Learn more about how we source and vet the parts we carry on our about us page.

Frequently Asked Questions

Does this kit include the flywheel?

That depends on the specific kit — check the specifications list above. Some kits in this range are conversion or full-pack kits that include a flywheel, while others are friction-and-pressure-plate kits designed to pair with your existing flywheel if it’s still within spec.

What’s included with the central slave cylinder (CSC) version?

Kits listed with a central/concentric slave cylinder include the full hydraulic release-bearing assembly, so you’re replacing the hydraulic component along with the friction parts rather than reusing a worn original.

How long does shipping take?

See our shipping policy for current delivery timing. We ship to all 50 US states.

What’s your return and warranty policy?

Full terms are posted on our warranty policy page. If a part arrives damaged or doesn’t match your order, contact our team and we’ll help sort out a replacement or return.

Can I install this clutch kit myself?

Clutch replacement requires dropping the transmission and, on most vehicles, involves specific alignment tools and torque specifications. It’s a job many DIYers with transmission-removal experience can handle, but if you’re not comfortable pulling a transmission, it’s generally best left to a qualified mechanic.

Will this kit work with a lightweight or performance flywheel?

This kit is specified to OE-equivalent dimensions. If your vehicle has an aftermarket flywheel installed, confirm the diameter, tooth count, and hub profile match this kit’s listed specifications rather than assuming compatibility.

Does the kit come with installation hardware?

Any mounting hardware included with the kit (screws, tools, bearings) is listed in the specifications section above. We recommend following your vehicle’s factory service manual for torque specs and installation sequence, since these vary by make and model.

Is a core exchange required on this part?

No core exchange is required — this clutch kit ships as a standalone replacement unit.

What makes this clutch kit different from buying individual components separately?

Buying the full kit means every part that wears at a similar rate gets replaced in the same service visit — disc, pressure plate, release bearing, and any flywheel or slave-cylinder components included with this specific kit. That avoids a comeback repair a few months later when an untouched worn part takes the new components down with it.

What does “600 0017 00” mean on the box?

That’s the LuK part number for this exact kit — 600 0017 00. Use it to cross-reference against your old part or your vehicle’s parts catalog to confirm you’re ordering the correct kit.