LESJÖFORS 4072991 Coil Spring – Front Axle

If your vehicle is sitting lower than it should, sagging to one side, or riding harshly over bumps, a worn or broken coil spring is often the culprit. The LESJÖFORS 4072991 coil spring is a replacement part engineered for the front axle, restoring the ride height and load support your suspension needs for a level stance, controlled handling, and a smoother ride on U.S. roads from coast to coast.

Key Benefits

The LESJÖFORS 4072991 coil spring restores factory ride height and spring rate to your suspension. Here’s what this replacement part:

• Correct ride height restoration engineered to LESJÖFORS 4072991’s manufacturing tolerances so your vehicle sits level and handles predictably.
• Coil Spring engineered to match OE load rating and mounting geometry for a direct-fit installation.
• Consistent load support under braking, cornering, and towing, reducing bottoming-out over rough pavement.
• Improved tire contact and wear patterns by keeping ride height and alignment geometry within spec.
• Corrosion-resistant coating designed to withstand road salt, moisture, and temperature swings across all 50 states.
• LESJÖFORS manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.

Product Specifications

Every LESJÖFORS 4072991 coil spring is manufactured to tight dimensional and load-rating tolerances. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.

Lesjöfors is a Swedish spring manufacturer with over 350 years of metalworking heritage, and is one of the largest coil spring producers in Europe, engineering springs to OE load and ride-height tolerances.

Use Cases and Applications

This front coil spring is suited for routine suspension maintenance, pre-inspection replacement, and restoring ride height after a spring sags or breaks. Typical scenarios where drivers choose this part include:

• Replacing a sagged or fractured coil spring identified during a routine service visit or alignment check.
• Restoring even ride height after one spring weakens while the opposite side is still within spec.
• Preparing a vehicle for towing season or long-distance travel where consistent load support matters most.
• Addressing a harsh or clunky ride, uneven ride height, or uneven tire wear traced back to worn springs.

Because it’s engineered for front axle applications, this part is intended to be installed as a direct axle-position match — not interchanged with the opposite end of the vehicle.

Quality Assurance and Certifications

Lesjöfors is a Swedish spring manufacturer with over 350 years of metalworking heritage, and is one of the largest coil spring producers in Europe, engineering springs to OE load and ride-height tolerances. Each LESJÖFORS 4072991 unit undergoes manufacturer quality control testing for load capacity, free length, and dimensional accuracy before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by organizations such as the National Highway Traffic Safety Administration (NHTSA), which publishes vehicle safety and suspension inspection guidance for U.S. drivers.

Shipping and Delivery

We ship the LESJÖFORS 4072991 coil spring to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full suspension and chassis parts shop for related components.

What Customers Are Saying

“I replaced the front axle spring with the LESJÖFORS 4072991 and the car stopped leaning to one side within a day of the install.” — Marcus, Columbus, OH

“My mechanic said it was a clean, direct-fit install. Shipping to VA took about five days.” — Kelly, Richmond, VA

Individual results may vary based on vehicle condition, driving style, and installation quality.

Frequently Asked Questions

What vehicles is this coil spring compatible with?

This LESJÖFORS 4072991 coil spring is manufactured to fit the front axle of its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.

Is this a direct OE replacement?

Yes. The LESJÖFORS 4072991 is engineered to match the load rating, free length, and mounting geometry of the original equipment coil spring, so no additional modification is required for installation.

Should I replace coil springs in pairs?

Most suspension technicians and OE manufacturers recommend replacing coil springs on the same axle in pairs to maintain even ride height, handling balance, and tire wear on both sides of the vehicle.

Should I replace the shock absorber at the same time as the coil spring?

Yes, this is strongly recommended. A coil spring and shock absorber work together to control ride height and damping; replacing only one often leaves the other component working outside its designed range. Browse our shock absorber catalog for a matching axle-position replacement.

What is spring rate and why does it matter?

Spring rate is how much force is required to compress the spring a given distance, and it directly determines ride height, load capacity, and ride comfort. This part is manufactured to match the OE spring rate for its listed application.

How long does shipping take?

Orders ship nationwide to all 50 U.S. states. Standard delivery typically takes 3–7 business days depending on your location; expedited options are available at checkout. Full details are on our shipping policy page.

What is your return policy on this part?

Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.

Does this coil spring come with a warranty?

Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.

How much does professional installation typically cost?

Labor costs vary by shop and region, but coil spring replacement requires a spring compressor and is best performed by a licensed repair shop, typically completed in under an hour per axle. We recommend having alignment checked after installation.

Can I install this coil spring myself?

Experienced DIY mechanics with a proper spring compressor can often complete this installation at home, but coil springs store significant compressed energy and improper handling can cause serious injury. If you are unsure, we recommend having it installed by a certified technician.

Why is this part priced at $30.99?

Pricing reflects the LESJÖFORS brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.

Do you ship to my state?

Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.

Related Parts and Resources

• Browse our full suspension & chassis catalog
• LESJÖFORS 4008474 Coil Spring – Front Axle
• LESJÖFORS 4295856 Coil Spring – Rear Axle
• Warranty policy
• Shipping policy
• General FAQ
• About CG Auto Parts Shop

Complete Your Suspension Repair

A coil spring works alongside a shock absorber to control ride height and damping together — most technicians recommend inspecting or replacing both at the same time on a given axle. These shock absorbers from our current catalog are frequently purchased alongside this spring:

• MAGNETI MARELLI 357110070000 Shock Absorber – Front Axle
• ASHIKA MA-22022 Shock Absorber – Front Axle
• KAMOKA 2000275 Shock Absorber – Front Axle
• KAVO PARTS SSA-10255 Shock Absorber – Front Axle
• TRW JGM1135T Shock Absorber – Front Axle

For general suspension maintenance guidance, the Wikipedia overview of coil spring technology and the Federal Motor Carrier Safety Administration both publish helpful reference material on vehicle suspension safety.