KAMOKA JBC0309 Brake Caliper – Rear Axle Left

When a brake caliper piston seizes or a seal starts leaking fluid, pad wear becomes uneven and stopping power drops. The KAMOKA JBC0309 brake caliper replaces the rear axle, left side unit with an OE-matching assembly built for consistent, predictable braking.

Key Benefits

The KAMOKA JBC0309 brake caliper is built to bring OE-level braking performance back to your vehicle. Here’s what you get:

• Axle- and side-specific engineering, sized and shaped for rear axle, left side applications rather than a universal fit.
• OE-matching mounting points and bore dimensions, engineered to bolt on without modification.
• Compatible caliper type matching the design listed in the specifications table below (see Brake Caliper Type).
• Consistent piston and seal performance, designed to provide even clamping force across the pad surface.
• Traceable manufacturing, identified by EAN 5901779856216 for accurate inventory and reordering.

Product Specifications

Every KAMOKA JBC0309 brake caliper is manufactured to defined dimensional and performance tolerances. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.

Use Cases and Applications

Drivers typically order this brake caliper for scenarios such as:

• Replacing a caliper that’s leaking brake fluid or showing a seized or sticking piston during inspection.
• Addressing uneven brake pad wear traced back to a caliper that isn’t releasing or clamping evenly.
• Restoring braking performance after a caliper is diagnosed as the cause of a pulling or dragging sensation.
• Replacing a caliper alongside a pad and rotor service for a complete axle-side brake job.

Because brake calipers are matched to specific axle positions and vehicle sides, always confirm fitment before ordering rather than relying on visual similarity alone. If you’re not sure whether the KAMOKA JBC0309 matches your specific vehicle side or caliper type, our support team can help you verify fitment using your VIN or your vehicle’s original caliper part number before you check out.

Manufacturing Quality

Kamoka is an aftermarket parts brand supplying braking, suspension, and steering components to the European aftermarket. This JBC0309 brake caliper is positioned in our Budget tier, a straightforward, no-frills option for drivers who want a functional OE-matching replacement without paying for premium branding. Housings, pistons, and seals are manufactured and quality-checked to dimensional tolerances intended to match the original equipment parts they replace. Because brakes are a critical safety system, the National Highway Traffic Safety Administration (NHTSA) recommends following your owner’s manual service intervals and having brake components inspected regularly.

We list the EAN, weight, caliper type, and compatible brake system information provided by KAMOKA directly in the specifications table above so you can cross-check this JBC0309 brake caliper against your vehicle’s original part before ordering. Confirming axle side and caliper type ahead of time helps avoid a return or exchange after the hydraulic system has already been opened.

Shipping and Delivery

We ship the KAMOKA JBC0309 brake caliper to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days. Review full details on our shipping policy page, or browse our full brakes and chassis parts shop for related components.

Frequently Asked Questions

What is your return policy on this part?

Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.

Can I install this brake caliper myself?

Caliper replacement requires opening the brake hydraulic system and bleeding the brakes afterward, which calls for more experience and tools than a pad-only replacement. Mechanically confident DIYers with a brake bleeding kit can often complete this job, but if you’re not fully comfortable, we recommend having it installed by a certified technician since braking is a critical safety system.

Do I need new brake pads when I replace a caliper?

It’s strongly recommended. If the old caliper caused uneven wear, contamination from leaking fluid, or dragging, the existing pads may already be damaged or worn unevenly. Installing new pads alongside a new caliper helps ensure even clamping and braking performance from the start.

Is this caliper compatible with a caliper that has an integrated parking brake?

Check the Brake Caliper Type row in the specifications table above. If your vehicle uses an electronic or cable-actuated parking brake integrated into the caliper, you’ll need a caliper specifically designed for that setup rather than a standard unit.

Do you ship to my state?

Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.

Is this a direct OE replacement?

Yes. The KAMOKA JBC0309 is engineered to match the mounting points, bore dimensions, and performance characteristics of the original equipment brake caliper, so no additional modification is required for installation.

Why does the KAMOKA JBC0309 cost $39.52?

Pricing reflects the KAMOKA brand’s manufacturing quality, materials, and Budget positioning relative to other calipers in our catalog, while remaining competitive with comparable OE and aftermarket options.

Does this caliper include the mounting bracket?

Check the specifications table above and the product images. Some calipers are sold as the caliper body only, while others are a loaded assembly. Contact us through the contact page if you need this confirmed before ordering.

How long does shipping take?

Orders ship nationwide to all 50 U.S. states. Standard delivery typically takes 3–7 business days depending on your location; expedited options are available at checkout. Full details are on our shipping policy page.

How do I know if my brake caliper needs replacing?

Common signs include visible brake fluid leaking near a wheel, a car pulling to one side under braking, a grinding or scraping noise, uneven pad wear between the inner and outer pad, or a caliper that feels seized when the wheel is spun by hand.

Do I need to bleed the brakes after installing a new caliper?

Yes. Any time a brake line or caliper is opened, air enters the hydraulic system and the brakes must be bled to restore a firm pedal and proper hydraulic pressure. This is a standard part of caliper replacement.

What vehicles is this brake caliper compatible with?

This KAMOKA JBC0309 brake caliper is manufactured to fit the rear axle, left side of its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.

Does this brake caliper come with a warranty?

Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.

Should I replace calipers in pairs (both sides of the axle)?

Many technicians recommend replacing calipers on both sides of the same axle together, especially if both have similar age and mileage, to maintain even braking force and prevent a repeat failure on the other side shortly after.

Related Parts and Resources

• Browse our full brakes & chassis catalog
• Warranty policy
• Shipping policy
• General FAQ
• About CG Auto Parts Shop

For general brake safety guidance, see the National Highway Traffic Safety Administration (NHTSA) vehicle safety guidance and the Wikipedia overview of disc brake systems.