KAMOKA 105021 Brake Pad Wear Sensor
$9.99
Genuine-fit KAMOKA 105021 warning contact — restores accurate pad wear warnings. Ships nationwide, order now for fast delivery.
Brake pad wear sensors are designed to alert you before your pads wear down to metal-on-metal contact, protecting your rotors from damage. The KAMOKA 105021 is manufactured to OE specifications, restoring accurate, reliable wear warnings.
Key Benefits
The KAMOKA 105021 warning contact is manufactured to restore accurate pad wear monitoring. Here’s what this replacement part offers:
- KAMOKA manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.
- OE-matching fitment designed to connect directly to your vehicle’s existing wiring harness with no modification.
- Early warning protection that helps prevent costly rotor damage from pads worn down to metal-on-metal contact.
- Straightforward installation using factory mounting points and connector types.
- Accurate wear detection engineered to KAMOKA 105021’s original electrical and mechanical specifications.
- Durable construction designed to withstand brake dust, heat, and moisture exposure over time.
Product Specifications
Every KAMOKA 105021 warning contact is manufactured to match OE electrical and dimensional specifications. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.
| Brand | KAMOKA |
| Manufacturer Part Number | 105021 |
| Fitting Position | Front Axle, Rear Axle |
| EAN | 5908242644516 |
| Brake Type | Disc Brake |
| OE Reference Number | 1695401617 |
| Price (USD) | $9.99 |
KAMOKA is an aftermarket brand focused on precision-engineered brake sensor and hardware components manufactured to strict quality-control standards.
Use Cases and Applications
This warning contact is suited for addressing a stuck or malfunctioning brake wear warning light, replacing a sensor during pad service, and restoring accurate pad wear monitoring. Typical scenarios where drivers choose this part include:
- Replacing a sensor after the wear warning light stays on despite adequate remaining pad material.
- Restoring warning functionality after a sensor fails to alert at the expected wear point.
- Installing a new sensor alongside a brake pad replacement, as many manufacturers recommend.
- Addressing a sensor damaged during a previous brake service.
Because wear sensors are manufactured for a specific electrical connector and mounting configuration, this part is intended as a direct match for the applications it’s designed for — always confirm fitment against your vehicle’s OE part number before ordering. Keeping this sensor in good working order helps protect your rotors from the accelerated wear and damage that comes from driving on pads that are worn past their service life.
Quality Assurance and Certifications
KAMOKA is an aftermarket brand focused on precision-engineered brake sensor and hardware components manufactured to strict quality-control standards. Each KAMOKA 105021 unit undergoes manufacturer quality control testing for dimensional accuracy and material durability before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as disc brake system design and components.
Shipping and Delivery
We ship the KAMOKA 105021 warning contact to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full brake parts shop for related components.
What Customers Are Saying
“”My wear light finally turned off after replacing this sensor. Connector matched perfectly.” — Cody, Tampa, FL
“”Straightforward plug-in replacement, exact OE match. Shipping to Reno took about 5 days.” — Chelsea, Reno, NV
Individual results may vary based on vehicle condition and installation quality.
Frequently Asked Questions
Why does my brake wear warning light stay on even with new pads?
This usually indicates a failed wear sensor rather than a pad issue — the sensor circuit may be damaged or not resetting properly. Replacing the sensor typically resolves the issue.
What is the EAN for the KAMOKA 105021?
The KAMOKA 105021 carries EAN 5908242644516. You can use this number, along with your vehicle’s OE reference number, to confirm fitment before ordering.
Which fitting position does this sensor cover?
This part fits the following position(s): Front Axle, Rear Axle. Check the specifications table above and confirm against your vehicle’s OE part number before ordering.
Is this a direct OE replacement?
Yes. The KAMOKA 105021 is engineered to match the connector type and mounting configuration of the original equipment sensor, so no modification is required for installation.
What vehicles is this warning contact compatible with?
This KAMOKA 105021 warning contact is manufactured to fit its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.
What is your return policy on this part?
Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.
Can I install this sensor myself?
Experienced DIY mechanics can typically install a wear sensor at home, especially during a brake pad replacement when the wheel is already off. If you’re not comfortable working on your brake system, we recommend having it installed by a qualified technician.
How long does shipping take?
Orders ship nationwide to all 50 U.S. states. Standard delivery typically takes 3–7 business days depending on your location; expedited options are available at checkout. Full details are on our shipping policy page.
Do you ship to my state?
Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.
Does this sensor come with a warranty?
Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.
What symptoms indicate a failed wear sensor?
Common symptoms include a wear warning light that stays illuminated despite adequate pad material, or no warning at all as pads wear thin — either points to a sensor that needs replacement.
Related Parts and Resources
- Browse our full brake parts catalog
- VEMO V30-72-0581 Brake Pad Wear Sensor
- MEYLE 014 054 0000 Brake Pad Wear Sensor
- A.B.S. 39582 Brake Pad Wear Sensor
- BOSCH 1 987 473 069 Brake Pad Wear Sensor
- VEMO V30-72-0746 Brake Pad Wear Sensor
- Warranty policy
- Shipping policy
- General FAQ
- About CG Auto Parts Shop
For general background on brake system design, see disc brake system design and components and NHTSA brake and chassis safety guidance.
| Fitting Position | Front Axle, Rear Axle |
|---|
Only logged in customers who have purchased this product may leave a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.