FEBI BILSTEIN 38677 Fuel Filter

Contaminated fuel is one of the most common — and most overlooked — causes of poor engine performance. The FEBI BILSTEIN 38677 fuel filter is manufactured to OE specifications, filtering out dirt, rust, and debris from your fuel supply so your engine gets the clean fuel it was designed to run on.

Key Benefits

The FEBI BILSTEIN 38677 fuel filter is manufactured to restore clean, consistent fuel delivery. Here’s what this replacement part offers:

• Corrosion-resistant housing designed to withstand fuel additives, moisture, and temperature swings across all 50 states.
• Straightforward installation designed to use factory mounting points and connections, with no additional modification required.
• Consistent fuel flow engineered to FEBI BILSTEIN 38677’s manufacturing tolerances for reliable engine performance in daily driving.
• FEBI BILSTEIN manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.
• Protection for downstream components, helping extend the service life of fuel injectors and fuel pumps by reducing particulate wear.
• Reduced risk of fuel starvation under load, helping maintain smooth acceleration and stable idle in stop-and-go traffic.

Product Specifications

Every FEBI BILSTEIN 38677 fuel filter is manufactured to tight dimensional and performance tolerances. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.

FEBI BILSTEIN is an aftermarket brand focused on precision-engineered filtration components manufactured to strict quality-control standards.

Use Cases and Applications

This fuel filter is suited for routine fuel system maintenance, pre-inspection replacement, and restoring smooth engine performance after a clogged filter is diagnosed during a service visit. Typical scenarios where drivers choose this part include:

• Replacing a fuel filter at the manufacturer-recommended service interval to prevent fuel starvation.
• Restoring smooth idle and acceleration after experiencing hesitation, stalling, or reduced power.
• Preparing a vehicle for a long-distance road trip where fuel system reliability matters most.
• Addressing hard starts, rough idling, or poor fuel economy traced back to a restricted fuel filter.

Because it’s engineered for a specific fuel system configuration, this part is intended to be installed as a direct match for the applications it’s designed for — always confirm fitment against your vehicle’s OE part number before ordering. Drivers who stay ahead of the manufacturer-recommended replacement interval typically avoid the more expensive repairs that come with a neglected fuel system, including premature fuel pump failure and injector fouling.

Quality Assurance and Certifications

FEBI BILSTEIN is an aftermarket brand focused on precision-engineered filtration components manufactured to strict quality-control standards. Each FEBI BILSTEIN 38677 unit undergoes manufacturer quality control testing for filtration efficiency, flow rate, and dimensional accuracy before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as general fuel filter technology and design.

Shipping and Delivery

We ship the FEBI BILSTEIN 38677 fuel filter to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full engine and filtration parts shop for related components.

What Customers Are Saying

“”Installed the FEBI BILSTEIN 38677 and the rough idle I was chasing disappeared right away. Fit perfectly, no issues.” — Monica, Boise, ID

“”My mechanic said this filter looked cleaner-built than the original. Engine runs smoother since I swapped it.” — Brianna, Tulsa, OK

Individual results may vary based on vehicle condition, fuel quality, and installation quality.

Frequently Asked Questions

What symptoms indicate a failing fuel filter?

Common symptoms include rough idling, hesitation or stumbling under acceleration, difficulty starting, reduced power, stalling, and in some cases reduced fuel economy. A severely clogged filter can eventually cause a no-start condition.

What type of fuel filter is this?

The FEBI BILSTEIN 38677 is a in-line filter fuel filter. See the specifications table above for full technical details.

How long does shipping take?

Orders ship nationwide to all 50 U.S. states. Standard delivery typically takes 3–7 business days depending on your location; expedited options are available at checkout. Full details are on our shipping policy page.

How much does professional installation typically cost?

Labor costs vary by shop and region, but fuel filter replacement is a routine maintenance service most licensed repair shops can complete quickly. Some inline filters are simple DIY jobs, while others require fuel system depressurization best left to a professional.

What vehicles is this fuel filter compatible with?

This FEBI BILSTEIN 38677 fuel filter is manufactured to fit its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.

What is the EAN for the FEBI BILSTEIN 38677?

The FEBI BILSTEIN 38677 carries EAN 4027816386773. You can use this number, along with your vehicle’s OE reference number, to confirm fitment before ordering.

Does this fuel filter come with a warranty?

Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.

How often should a fuel filter be replaced?

Most manufacturers recommend replacing the fuel filter every 20,000–40,000 miles, though intervals vary by vehicle and fuel quality. Check your owner’s manual for the manufacturer-recommended interval.

Why is this part priced at $19.99?

Pricing reflects the FEBI BILSTEIN brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.

Do you ship to my state?

Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.

Is this a direct OE replacement?

Yes. The FEBI BILSTEIN 38677 is engineered to match the fitment, connection type, and filtration performance of the original equipment fuel filter, so no additional modification is required for installation.

Related Parts and Resources

• Browse our full engine & filtration catalog
• FEBI BILSTEIN 33464 Fuel Filter
• FEBI BILSTEIN 48528 Fuel Filter
• FEBI BILSTEIN 32399 Fuel Filter
• FEBI BILSTEIN 17635 Fuel Filter
• FEBI BILSTEIN 21622 Fuel Filter
• Warranty policy
• Shipping policy
• General FAQ
• About CG Auto Parts Shop

For general fuel system maintenance guidance, see general fuel filter technology and design and EPA guidance on fuel system maintenance and emissions.