FEBI BILSTEIN 171531 Splash Panel

Rust, road salt, and flying debris take a toll on an exposed brake disc — which is exactly what the splash panel is designed to prevent. The FEBI BILSTEIN 171531 splash panel replaces a corroded or damaged original panel with an OE-matched part built for long-term durability.

Key Benefits

The FEBI BILSTEIN 171531 splash panel is manufactured to restore rotor protection and OE fitment. Here’s what this replacement part offers:

• Rotor protection that shields the brake disc from road debris, mud, and standing water, helping reduce uneven wear and corrosion.
• Corrosion-resistant material designed to hold up to road salt, moisture, and temperature extremes across all climates.
• FEBI BILSTEIN manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.
• Improved brake system longevity by reducing the debris exposure that contributes to premature rotor and pad wear.
• Straightforward installation using factory mounting points, with no modification to the caliper, hub, or knuckle required.
• Precise axle-specific design, manufactured for the correct side and position so it bolts in without adjustment.

Product Specifications

Every FEBI BILSTEIN 171531 splash panel is manufactured to precise dimensional tolerances to match OE mounting points. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.

FEBI BILSTEIN is an aftermarket brand focused on precision-engineered body and brake components manufactured to strict quality-control standards.

Use Cases and Applications

This splash panel is suited for routine brake service, rust repair, and restoring rotor protection after an original panel has corroded or been damaged. Typical scenarios where drivers choose this part include:

• Replacing a rusted-through or cracked splash panel discovered during a brake job or rotation.
• Restoring OE rotor protection after off-road driving or exposure to heavy road salt.
• Addressing a rattling or scraping noise caused by a loose or damaged splash panel contacting the rotor.
• Completing a full brake system refresh alongside new pads, rotors, or calipers.

Because splash panels are manufactured for a specific axle position and side, this part is intended as a direct match for the axle position listed in the specifications — always confirm fitment against your vehicle’s OE part number and axle position before ordering. Replacing a damaged splash panel promptly helps prevent it from contacting and scoring the rotor surface, which can turn a low-cost repair into a more expensive one.

Quality Assurance and Certifications

FEBI BILSTEIN is an aftermarket brand focused on precision-engineered body and brake components manufactured to strict quality-control standards. Each FEBI BILSTEIN 171531 unit undergoes manufacturer quality control testing for dimensional accuracy and corrosion resistance before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as disc brake system design and components.

Shipping and Delivery

We ship the FEBI BILSTEIN 171531 splash panel to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full brake parts shop for related components.

What Customers Are Saying

“”My old splash panel had rusted through completely. The FEBI BILSTEIN 171531 fit right in and the scraping noise is gone.” — Owen, Baton Rouge, LA

“”Cheap fix for what could have been a bigger rotor problem. Fit was exact, no trimming needed.” — Renee, Fresno, CA

Individual results may vary based on vehicle condition and installation quality.

Frequently Asked Questions

Can I install this splash panel myself?

Experienced DIY mechanics with basic tools can typically install a splash panel at home, especially when the wheel and rotor are already removed for other brake work. If you’re not comfortable working on your brake system, we recommend having it installed by a qualified technician.

What symptoms indicate a damaged or failing splash panel?

Common symptoms include a rattling or scraping noise near the wheel (especially when turning), visible rust-through or cracking, and a splash panel that’s bent or contacting the rotor.

What is the EAN for the FEBI BILSTEIN 171531?

The FEBI BILSTEIN 171531 carries EAN 4054224715314. You can use this number, along with your vehicle’s OE reference number, to confirm fitment before ordering.

What is your return policy on this part?

Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.

Which axle position does this splash panel fit?

The FEBI BILSTEIN 171531 is manufactured for the Front Axle Left position. Check the specifications table above and confirm against your vehicle’s OE part number before ordering.

Do you ship to my state?

Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.

What vehicles is this splash panel compatible with?

This FEBI BILSTEIN 171531 splash panel is manufactured to fit its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.

Is this a direct OE replacement?

Yes. The FEBI BILSTEIN 171531 is engineered to match the mounting points and dimensions of the original equipment splash panel, so no modification is required for installation.

How much does professional installation typically cost?

Labor costs vary by shop and region, but splash panel replacement is a routine service most brake shops can complete quickly, often alongside a pad or rotor replacement.

Does this splash panel come with a warranty?

Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.

Do I need to replace the splash panel in pairs?

This splash panel has a paired counterpart (part number 171532) for the opposite side. Many installers replace both sides together for even wear and protection, though it isn’t strictly required unless the other side is also damaged.

Related Parts and Resources

• Browse our full brake parts catalog
• FEBI BILSTEIN 171541 Splash Panel
• FEBI BILSTEIN 171545 Splash Panel
• FEBI BILSTEIN 171544 Splash Panel
• FEBI BILSTEIN 171532 Splash Panel
• FEBI BILSTEIN 171540 Splash Panel
• Warranty policy
• Shipping policy
• General FAQ
• About CG Auto Parts Shop

For general background on brake system design, see disc brake system design and components and NHTSA brake and chassis safety guidance.