BREMBO A 00 519 Brake Pad Wear Sensor
$16.99
Genuine-fit BREMBO A 00 519 warning contact — restores accurate pad wear warnings. Ships nationwide, order now for fast delivery.
Brake pad wear sensors are designed to alert you before your pads wear down to metal-on-metal contact, protecting your rotors from damage. The BREMBO A 00 519 is manufactured to OE specifications, restoring accurate, reliable wear warnings.
Key Benefits
The BREMBO A 00 519 warning contact is manufactured to restore accurate pad wear monitoring. Here’s what this replacement part offers:
- BREMBO manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.
- Straightforward installation using factory mounting points and connector types.
- Early warning protection that helps prevent costly rotor damage from pads worn down to metal-on-metal contact.
- Durable construction designed to withstand brake dust, heat, and moisture exposure over time.
- OE-matching fitment designed to connect directly to your vehicle’s existing wiring harness with no modification.
- Accurate wear detection engineered to BREMBO A 00 519’s original electrical and mechanical specifications.
Product Specifications
Every BREMBO A 00 519 warning contact is manufactured to match OE electrical and dimensional specifications. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.
| Brand | BREMBO |
| Manufacturer Part Number | A 00 519 |
| Fitting Position | Front Axle Left |
| EAN | 8020584112922 |
| Brake Type | Disc Brake |
| Length | 680 |
| Price (USD) | $16.99 |
BREMBO is an aftermarket brand focused on precision-engineered brake sensor and hardware components manufactured to strict quality-control standards.
Use Cases and Applications
This warning contact is suited for addressing a stuck or malfunctioning brake wear warning light, replacing a sensor during pad service, and restoring accurate pad wear monitoring. Typical scenarios where drivers choose this part include:
- Replacing a sensor after the wear warning light stays on despite adequate remaining pad material.
- Restoring warning functionality after a sensor fails to alert at the expected wear point.
- Installing a new sensor alongside a brake pad replacement, as many manufacturers recommend.
- Addressing a sensor damaged during a previous brake service.
Because wear sensors are manufactured for a specific electrical connector and mounting configuration, this part is intended as a direct match for the applications it’s designed for — always confirm fitment against your vehicle’s OE part number before ordering. Keeping this sensor in good working order helps protect your rotors from the accelerated wear and damage that comes from driving on pads that are worn past their service life.
Quality Assurance and Certifications
BREMBO is an aftermarket brand focused on precision-engineered brake sensor and hardware components manufactured to strict quality-control standards. Each BREMBO A 00 519 unit undergoes manufacturer quality control testing for dimensional accuracy and material durability before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as disc brake system design and components.
Shipping and Delivery
We ship the BREMBO A 00 519 warning contact to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full brake parts shop for related components.
What Customers Are Saying
“”Simple fix for a warning light that wouldn’t go away. Would order again.” — Derek, Akron, OH
“”Installed during my brake pad job, works exactly as expected.” — Brianna, Fresno, CA
Individual results may vary based on vehicle condition and installation quality.
Frequently Asked Questions
What symptoms indicate a failed wear sensor?
Common symptoms include a wear warning light that stays illuminated despite adequate pad material, or no warning at all as pads wear thin — either points to a sensor that needs replacement.
What is your return policy on this part?
Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.
Can I install this sensor myself?
Experienced DIY mechanics can typically install a wear sensor at home, especially during a brake pad replacement when the wheel is already off. If you’re not comfortable working on your brake system, we recommend having it installed by a qualified technician.
What is the EAN for the BREMBO A 00 519?
The BREMBO A 00 519 carries EAN 8020584112922. You can use this number, along with your vehicle’s OE reference number, to confirm fitment before ordering.
Why does my brake wear warning light stay on even with new pads?
This usually indicates a failed wear sensor rather than a pad issue — the sensor circuit may be damaged or not resetting properly. Replacing the sensor typically resolves the issue.
Does this sensor come with a warranty?
Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.
Why is this part priced at $16.99?
Pricing reflects the BREMBO brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.
Do you ship to my state?
Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.
How long does shipping take?
Orders ship nationwide to all 50 U.S. states. Standard delivery typically takes 3–7 business days depending on your location; expedited options are available at checkout. Full details are on our shipping policy page.
Is this a direct OE replacement?
Yes. The BREMBO A 00 519 is engineered to match the connector type and mounting configuration of the original equipment sensor, so no modification is required for installation.
Which fitting position does this sensor cover?
This part fits the following position(s): Front Axle Left. Check the specifications table above and confirm against your vehicle’s OE part number before ordering.
Related Parts and Resources
- Browse our full brake parts catalog
- BREMBO A 00 211 Brake Pad Wear Sensor
- BREMBO A 00 474 Brake Pad Wear Sensor
- BREMBO A 00 520 Brake Pad Wear Sensor
- BREMBO A 00 286 Brake Pad Wear Sensor
- BREMBO A 00 434 Brake Pad Wear Sensor
- Warranty policy
- Shipping policy
- General FAQ
- About CG Auto Parts Shop
For general background on brake system design, see disc brake system design and components and NHTSA brake and chassis safety guidance.
| Fitting Position | Front Axle Left |
|---|
Only logged in customers who have purchased this product may leave a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.