QUICK BRAKE WS 0219 A Brake Pad Wear Sensor
$9.99
Fix a stuck wear light with the QUICK BRAKE WS 0219 A warning contact. OE-matched fitment, ships to all 50 states.
Brake pad wear sensors are designed to alert you before your pads wear down to metal-on-metal contact, protecting your rotors from damage. The QUICK BRAKE WS 0219 A is manufactured to OE specifications, restoring accurate, reliable wear warnings.
Key Benefits
The QUICK BRAKE WS 0219 A warning contact is manufactured to restore accurate pad wear monitoring. Here’s what this replacement part offers:
- Straightforward installation using factory mounting points and connector types.
- Durable construction designed to withstand brake dust, heat, and moisture exposure over time.
- Accurate wear detection engineered to QUICK BRAKE WS 0219 A’s original electrical and mechanical specifications.
- OE-matching fitment designed to connect directly to your vehicle’s existing wiring harness with no modification.
- QUICK BRAKE manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.
- Early warning protection that helps prevent costly rotor damage from pads worn down to metal-on-metal contact.
Product Specifications
Every QUICK BRAKE WS 0219 A warning contact is manufactured to match OE electrical and dimensional specifications. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.
| Brand | QUICK BRAKE |
| Manufacturer Part Number | WS 0219 A |
| Fitting Position | Rear Axle |
| EAN | 5706021081664 |
| Length | 760 |
| Additional Info | Axle Kit |
| Price (USD) | $9.99 |
QUICK BRAKE is an aftermarket brand focused on precision-engineered brake sensor and hardware components manufactured to strict quality-control standards.
Use Cases and Applications
This warning contact is suited for addressing a stuck or malfunctioning brake wear warning light, replacing a sensor during pad service, and restoring accurate pad wear monitoring. Typical scenarios where drivers choose this part include:
- Replacing a sensor after the wear warning light stays on despite adequate remaining pad material.
- Restoring warning functionality after a sensor fails to alert at the expected wear point.
- Installing a new sensor alongside a brake pad replacement, as many manufacturers recommend.
- Addressing a sensor damaged during a previous brake service.
Because wear sensors are manufactured for a specific electrical connector and mounting configuration, this part is intended as a direct match for the applications it’s designed for — always confirm fitment against your vehicle’s OE part number before ordering. Keeping this sensor in good working order helps protect your rotors from the accelerated wear and damage that comes from driving on pads that are worn past their service life.
Quality Assurance and Certifications
QUICK BRAKE is an aftermarket brand focused on precision-engineered brake sensor and hardware components manufactured to strict quality-control standards. Each QUICK BRAKE WS 0219 A unit undergoes manufacturer quality control testing for dimensional accuracy and material durability before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as disc brake system design and components.
Shipping and Delivery
We ship the QUICK BRAKE WS 0219 A warning contact to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full brake parts shop for related components.
What Customers Are Saying
“”Simple fix for a warning light that wouldn’t go away. Would order again.” — Hannah, Akron, OH
“”My wear light finally turned off after replacing this sensor. Connector matched perfectly.” — Alicia, Tampa, FL
Individual results may vary based on vehicle condition and installation quality.
Frequently Asked Questions
How long does shipping take?
Orders ship nationwide to all 50 U.S. states. Standard delivery typically takes 3–7 business days depending on your location; expedited options are available at checkout. Full details are on our shipping policy page.
Can I install this sensor myself?
Experienced DIY mechanics can typically install a wear sensor at home, especially during a brake pad replacement when the wheel is already off. If you’re not comfortable working on your brake system, we recommend having it installed by a qualified technician.
Why is this part priced at $9.99?
Pricing reflects the QUICK BRAKE brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.
Why does my brake wear warning light stay on even with new pads?
This usually indicates a failed wear sensor rather than a pad issue — the sensor circuit may be damaged or not resetting properly. Replacing the sensor typically resolves the issue.
Do you ship to my state?
Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.
Is this a direct OE replacement?
Yes. The QUICK BRAKE WS 0219 A is engineered to match the connector type and mounting configuration of the original equipment sensor, so no modification is required for installation.
What vehicles is this warning contact compatible with?
This QUICK BRAKE WS 0219 A warning contact is manufactured to fit its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.
What is the EAN for the QUICK BRAKE WS 0219 A?
The QUICK BRAKE WS 0219 A carries EAN 5706021081664. You can use this number, along with your vehicle’s OE reference number, to confirm fitment before ordering.
Does this sensor come with a warranty?
Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.
What symptoms indicate a failed wear sensor?
Common symptoms include a wear warning light that stays illuminated despite adequate pad material, or no warning at all as pads wear thin — either points to a sensor that needs replacement.
Which fitting position does this sensor cover?
This part fits the following position(s): Rear Axle. Check the specifications table above and confirm against your vehicle’s OE part number before ordering.
Related Parts and Resources
- Browse our full brake parts catalog
- QUICK BRAKE WS 0246 A Brake Pad Wear Sensor
- QUICK BRAKE WS 0289 A Brake Pad Wear Sensor
- QUICK BRAKE WS 0320 A Brake Pad Wear Sensor
- QUICK BRAKE WS 0163 A Brake Pad Wear Sensor
- MAXGEAR 20-0140 Brake Pad Wear Sensor
- Warranty policy
- Shipping policy
- General FAQ
- About CG Auto Parts Shop
For general background on brake system design, see disc brake system design and components and NHTSA brake and chassis safety guidance.
| Fitting Position | Rear Axle |
|---|
Only logged in customers who have purchased this product may leave a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.