VEMO V10-72-0804 Brake Pad Wear Sensor

Brake pad wear sensors are designed to alert you before your pads wear down to metal-on-metal contact, protecting your rotors from damage. The VEMO V10-72-0804 is manufactured to OE specifications, restoring accurate, reliable wear warnings.

Key Benefits

The VEMO V10-72-0804 warning contact is manufactured to restore accurate pad wear monitoring. Here’s what this replacement part offers:

• Accurate wear detection engineered to VEMO V10-72-0804’s original electrical and mechanical specifications.
• Early warning protection that helps prevent costly rotor damage from pads worn down to metal-on-metal contact.
• VEMO manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.
• OE-matching fitment designed to connect directly to your vehicle’s existing wiring harness with no modification.
• Straightforward installation using factory mounting points and connector types.
• Durable construction designed to withstand brake dust, heat, and moisture exposure over time.

Product Specifications

Every VEMO V10-72-0804 warning contact is manufactured to match OE electrical and dimensional specifications. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.

VEMO is an aftermarket brand focused on precision-engineered brake sensor and hardware components manufactured to strict quality-control standards.

Use Cases and Applications

This warning contact is suited for addressing a stuck or malfunctioning brake wear warning light, replacing a sensor during pad service, and restoring accurate pad wear monitoring. Typical scenarios where drivers choose this part include:

• Replacing a sensor after the wear warning light stays on despite adequate remaining pad material.
• Restoring warning functionality after a sensor fails to alert at the expected wear point.
• Installing a new sensor alongside a brake pad replacement, as many manufacturers recommend.
• Addressing a sensor damaged during a previous brake service.

Because wear sensors are manufactured for a specific electrical connector and mounting configuration, this part is intended as a direct match for the applications it’s designed for — always confirm fitment against your vehicle’s OE part number before ordering. Keeping this sensor in good working order helps protect your rotors from the accelerated wear and damage that comes from driving on pads that are worn past their service life.

Quality Assurance and Certifications

VEMO is an aftermarket brand focused on precision-engineered brake sensor and hardware components manufactured to strict quality-control standards. Each VEMO V10-72-0804 unit undergoes manufacturer quality control testing for dimensional accuracy and material durability before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as disc brake system design and components.

Shipping and Delivery

We ship the VEMO V10-72-0804 warning contact to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full brake parts shop for related components.

What Customers Are Saying

“”Straightforward plug-in replacement, exact OE match. Shipping to Omaha took about 3 days.” — Priya, Omaha, NE

“”Installed during my brake pad job, works exactly as expected.” — Alicia, Richmond, VA

Individual results may vary based on vehicle condition and installation quality.

Frequently Asked Questions

What is the EAN for the VEMO V10-72-0804?

The VEMO V10-72-0804 carries EAN 4046001491634. You can use this number, along with your vehicle’s OE reference number, to confirm fitment before ordering.

What vehicles is this warning contact compatible with?

This VEMO V10-72-0804 warning contact is manufactured to fit its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.

Is this a direct OE replacement?

Yes. The VEMO V10-72-0804 is engineered to match the connector type and mounting configuration of the original equipment sensor, so no modification is required for installation.

Which fitting position does this sensor cover?

This part fits the following position(s): Front Axle. Check the specifications table above and confirm against your vehicle’s OE part number before ordering.

Why does my brake wear warning light stay on even with new pads?

This usually indicates a failed wear sensor rather than a pad issue — the sensor circuit may be damaged or not resetting properly. Replacing the sensor typically resolves the issue.

Does this sensor come with a warranty?

Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.

Can I install this sensor myself?

Experienced DIY mechanics can typically install a wear sensor at home, especially during a brake pad replacement when the wheel is already off. If you’re not comfortable working on your brake system, we recommend having it installed by a qualified technician.

What is your return policy on this part?

Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.

Do you ship to my state?

Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.

Why is this part priced at $9.99?

Pricing reflects the VEMO brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.

What symptoms indicate a failed wear sensor?

Common symptoms include a wear warning light that stays illuminated despite adequate pad material, or no warning at all as pads wear thin — either points to a sensor that needs replacement.

Related Parts and Resources

• Browse our full brake parts catalog
• VEMO V30-72-0593-1 Brake Pad Wear Sensor
• BREMBO A 00 520 Brake Pad Wear Sensor
• BOSCH 1 987 473 548 Brake Pad Wear Sensor
• QUICK BRAKE WS 0219 A Brake Pad Wear Sensor
• MAXGEAR 23-0005 Brake Pad Wear Sensor
• Warranty policy
• Shipping policy
• General FAQ
• About CG Auto Parts Shop

For general background on brake system design, see disc brake system design and components and NHTSA brake and chassis safety guidance.