MEYLE 014 911 0001 Brake Disc Bolt

During a rotor replacement, a corroded or stripped disc bolt is easy to overlook but critical to get right. The MEYLE 014 911 0001 brake disc bolt is manufactured to exact thread and length specifications, ensuring your rotor seats correctly against the hub.

Key Benefits

The MEYLE 014 911 0001 brake disc bolt is manufactured to precise thread specifications. Here’s what this replacement part offers:

• Straightforward installation using standard hand tools, with no special equipment required.
• MEYLE manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.
• Corrosion-resistant plating designed to resist rust and seizing from road salt and moisture exposure.
• OE-matching thread specifications, eliminating the risk of cross-threading or improper torque from a mismatched bolt.
• Secure rotor mounting engineered to MEYLE 014 911 0001’s exact thread size and length for proper hub-to-rotor seating.
• Consistent clamping force, helping maintain proper rotor seating and reducing the risk of vibration or runout.

Product Specifications

Every MEYLE 014 911 0001 brake disc bolt is manufactured to precise thread and dimensional tolerances. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.

MEYLE is an aftermarket brand focused on precision-engineered brake hardware manufactured to strict quality-control standards.

Use Cases and Applications

This brake disc bolt is suited for rotor replacement, brake service, and restoring proper hub-to-rotor mounting after a bolt is found stripped, corroded, or missing. Typical scenarios where drivers choose this part include:

• Replacing a stripped or seized bolt discovered during a rotor swap.
• Restoring proper torque specification after a bolt shows signs of thread damage.
• Completing a full brake system refresh alongside new pads, rotors, or calipers.
• Addressing vibration or noise traced back to an improperly seated rotor.

Because disc bolts are manufactured to a specific thread size and length, this part is intended as a direct match for the applications it’s designed for — always confirm fitment and torque specification against your vehicle’s OE part number before ordering. Using the correct replacement bolt, torqued to spec, helps ensure your rotor stays properly seated under braking load.

Quality Assurance and Certifications

MEYLE is an aftermarket brand focused on precision-engineered brake hardware manufactured to strict quality-control standards. Each MEYLE 014 911 0001 unit undergoes manufacturer quality control testing for dimensional accuracy and material durability before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as disc brake system design and components.

Shipping and Delivery

We ship the MEYLE 014 911 0001 brake disc bolt to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full brake parts shop for related components.

What Customers Are Saying

“”Would order again — correct thread pitch and length, no surprises.” — Alicia, Columbus, OH

“”Old bolt was rusted solid. This one matched the thread perfectly and torqued down exactly to spec.” — Grant, Baton Rouge, LA

Individual results may vary based on vehicle condition and installation quality.

Frequently Asked Questions

How many bolts do I need for a rotor replacement?

This varies by vehicle — some hubs use 3-5 bolts per rotor. Check your vehicle’s service manual or the specifications table above, and we recommend replacing all bolts on an axle at the same time.

What is your return policy on this part?

Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.

Should I use thread locker on brake disc bolts?

Follow your vehicle manufacturer’s specification — some applications call for thread locker, others don’t. Check your service manual or consult a qualified technician if you’re unsure.

What vehicles is this brake disc bolt compatible with?

This MEYLE 014 911 0001 brake disc bolt is manufactured to fit its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.

Why is this part priced at $9.99?

Pricing reflects the MEYLE brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.

Is this a direct OE replacement?

Yes. The MEYLE 014 911 0001 is engineered to match the thread size, length, and specification of the original equipment bolt, so no modification is required for installation.

Can I install this bolt myself?

Experienced DIY mechanics with a torque wrench and basic hand tools can typically install disc bolts at home during a rotor swap. If you’re not comfortable working on your brake system, we recommend having it installed by a qualified technician.

What is the EAN for the MEYLE 014 911 0001?

The MEYLE 014 911 0001 carries EAN 4040074437087. You can use this number, along with your vehicle’s OE reference number, to confirm fitment before ordering.

What fitting position does this bolt cover?

See the specifications table above for exact fitting position details.

Do you ship to my state?

Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.

Does this bolt come with a warranty?

Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.

Related Parts and Resources

• Browse our full brake parts catalog
• AIC 53273 Brake Disc Bolt
• TOPRAN 115 526 Brake Disc Bolt
• QUICK BRAKE 11679K Brake Disc Bolt
• QUICK BRAKE 11667K Brake Disc Bolt
• QUICK BRAKE 11662K Brake Disc Bolt
• Warranty policy
• Shipping policy
• General FAQ
• About CG Auto Parts Shop

For general background on brake system design, see disc brake system design and components and NHTSA brake and chassis safety guidance.