QUICK BRAKE 11671K Brake Disc Bolt
$9.99
Replace a stripped bolt with the QUICK BRAKE 11671K brake disc bolt. OE-matched thread, ships to all 50 states.
Brake disc bolts secure the rotor to the wheel hub and are engineered to precise torque and thread specifications — reusing a stripped or corroded bolt risks an improperly seated rotor. The QUICK BRAKE 11671K restores that secure connection with OE-matching thread size and length.
Key Benefits
The QUICK BRAKE 11671K brake disc bolt is manufactured to precise thread specifications. Here’s what this replacement part offers:
- Consistent clamping force, helping maintain proper rotor seating and reducing the risk of vibration or runout.
- OE-matching thread specifications, eliminating the risk of cross-threading or improper torque from a mismatched bolt.
- Straightforward installation using standard hand tools, with no special equipment required.
- QUICK BRAKE manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.
- Corrosion-resistant plating designed to resist rust and seizing from road salt and moisture exposure.
- Secure rotor mounting engineered to QUICK BRAKE 11671K’s exact thread size and length for proper hub-to-rotor seating.
Product Specifications
Every QUICK BRAKE 11671K brake disc bolt is manufactured to precise thread and dimensional tolerances. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.
| Brand | QUICK BRAKE |
| Manufacturer Part Number | 11671K |
| Fitting Position | Front Axle, Rear Axle |
| EAN | 5706021127423 |
| Length | 14 |
| Thread Size | M6x1 |
| Price (USD) | $9.99 |
QUICK BRAKE is an aftermarket brand focused on precision-engineered brake hardware manufactured to strict quality-control standards.
Use Cases and Applications
This brake disc bolt is suited for rotor replacement, brake service, and restoring proper hub-to-rotor mounting after a bolt is found stripped, corroded, or missing. Typical scenarios where drivers choose this part include:
- Replacing a stripped or seized bolt discovered during a rotor swap.
- Restoring proper torque specification after a bolt shows signs of thread damage.
- Completing a full brake system refresh alongside new pads, rotors, or calipers.
- Addressing vibration or noise traced back to an improperly seated rotor.
Because disc bolts are manufactured to a specific thread size and length, this part is intended as a direct match for the applications it’s designed for — always confirm fitment and torque specification against your vehicle’s OE part number before ordering. Using the correct replacement bolt, torqued to spec, helps ensure your rotor stays properly seated under braking load.
Quality Assurance and Certifications
QUICK BRAKE is an aftermarket brand focused on precision-engineered brake hardware manufactured to strict quality-control standards. Each QUICK BRAKE 11671K unit undergoes manufacturer quality control testing for dimensional accuracy and material durability before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as disc brake system design and components.
Shipping and Delivery
We ship the QUICK BRAKE 11671K brake disc bolt to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full brake parts shop for related components.
What Customers Are Saying
“”Would order again — correct thread pitch and length, no surprises.” — Brianna, Spokane, WA
“”Simple part, did exactly what it needed to. No stripping or cross-threading issues.” — Derek, Akron, OH
Individual results may vary based on vehicle condition and installation quality.
Frequently Asked Questions
Does this bolt come with a warranty?
Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.
Should I use thread locker on brake disc bolts?
Follow your vehicle manufacturer’s specification — some applications call for thread locker, others don’t. Check your service manual or consult a qualified technician if you’re unsure.
Why is this part priced at $9.99?
Pricing reflects the QUICK BRAKE brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.
How many bolts do I need for a rotor replacement?
This varies by vehicle — some hubs use 3-5 bolts per rotor. Check your vehicle’s service manual or the specifications table above, and we recommend replacing all bolts on an axle at the same time.
What fitting position does this bolt cover?
This part fits the following position(s): Front Axle, Rear Axle. Check the specifications table above and confirm against your vehicle’s OE part number before ordering.
Do you ship to my state?
Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.
What is the EAN for the QUICK BRAKE 11671K?
The QUICK BRAKE 11671K carries EAN 5706021127423. You can use this number, along with your vehicle’s OE reference number, to confirm fitment before ordering.
Is this a direct OE replacement?
Yes. The QUICK BRAKE 11671K is engineered to match the thread size, length, and specification of the original equipment bolt, so no modification is required for installation.
Can I install this bolt myself?
Experienced DIY mechanics with a torque wrench and basic hand tools can typically install disc bolts at home during a rotor swap. If you’re not comfortable working on your brake system, we recommend having it installed by a qualified technician.
What is your return policy on this part?
Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.
What vehicles is this brake disc bolt compatible with?
This QUICK BRAKE 11671K brake disc bolt is manufactured to fit its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.
Related Parts and Resources
- Browse our full brake parts catalog
- QUICK BRAKE 11665K Brake Disc Bolt
- QUICK BRAKE 11679K Brake Disc Bolt
- QUICK BRAKE 11666K Brake Disc Bolt
- QUICK BRAKE 11670K Brake Disc Bolt
- QUICK BRAKE 11667K Brake Disc Bolt
- Warranty policy
- Shipping policy
- General FAQ
- About CG Auto Parts Shop
For general background on brake system design, see disc brake system design and components and NHTSA brake and chassis safety guidance.
| Fitting Position | Front Axle, Rear Axle |
|---|
Only logged in customers who have purchased this product may leave a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.