ERT 420006 Brake Pad Accessory Kit

Reusing old, corroded shims, clips, and anti-rattle springs during a brake pad job is one of the most common causes of squealing brakes and uneven pad wear. The ERT 420006 accessory kit supplies the fresh hardware your new pads need for a quiet, secure installation.

Key Benefits

The ERT 420006 accessory kit is manufactured to support a quiet, secure brake pad installation. Here’s what this replacement part offers:

• OE-matching fitment designed to match the original hardware set for your specific caliper and pad application.
• Corrosion-resistant components designed to resist rust and seizing from road salt and moisture exposure.
• Reduced brake noise from fresh anti-rattle springs and shims engineered to ERT 420006’s specifications.
• ERT manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.
• Complete fitting hardware in one kit, saving you from sourcing individual clips, shims, and springs separately.
• Even pad seating that helps promote uniform pad wear and consistent braking performance.

Product Specifications

Every ERT 420006 accessory kit is manufactured to match OE fitting hardware specifications. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.

ERT is an aftermarket brand focused on precision-engineered brake hardware manufactured to strict quality-control standards.

Use Cases and Applications

This accessory kit is suited for brake pad replacement, addressing brake squeal, and restoring proper pad seating hardware during routine brake service. Typical scenarios where drivers choose this part include:

• Installing new brake pads and replacing the fitting hardware at the same time, as most manufacturers recommend.
• Addressing persistent brake squeal traced back to worn or missing anti-rattle springs.
• Restoring proper pad seating after noticing uneven pad wear.
• Completing a full brake system refresh alongside new pads, rotors, or calipers.

Because fitting hardware is manufactured for a specific caliper and pad application, this part is intended as a direct match for the applications it’s designed for — always confirm fitment against your vehicle’s OE part number before ordering. Replacing this hardware alongside new pads is standard practice among brake technicians and helps prevent the noise and uneven wear that come with reusing old clips and shims.

Quality Assurance and Certifications

ERT is an aftermarket brand focused on precision-engineered brake hardware manufactured to strict quality-control standards. Each ERT 420006 unit undergoes manufacturer quality control testing for dimensional accuracy and material durability before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as disc brake system design and components.

Shipping and Delivery

We ship the ERT 420006 accessory kit to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full brake parts shop for related components.

What Customers Are Saying

“”Matched the OE hardware exactly, all the clips and shims fit perfectly. Shipping to Fresno took about 5 days.” — Alicia, Fresno, CA

“”Easy to install alongside my pad job. Would order again.” — Chelsea, Charlotte, NC

Individual results may vary based on vehicle condition and installation quality.

Frequently Asked Questions

Do you ship to my state?

Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.

Can I install this kit myself?

Experienced DIY mechanics performing a pad replacement can typically install this hardware kit at the same time with basic tools. If you’re not comfortable working on your brake system, we recommend having it installed by a qualified technician.

Which fitting position does this kit cover?

This part fits the following position(s): Front Axle. Check the specifications table above and confirm against your vehicle’s OE part number before ordering.

What’s included in this accessory kit?

Accessory kits typically include the shims, anti-rattle springs, and retaining clips needed to install new brake pads. Exact contents vary by application — see the specifications table above for details specific to this kit.

Why is this part priced at $9.99?

Pricing reflects the ERT brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.

What is the EAN for the ERT 420006?

The ERT 420006 carries EAN 8435123157195. You can use this number, along with your vehicle’s OE reference number, to confirm fitment before ordering.

Does this kit come with a warranty?

Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.

What vehicles is this accessory kit compatible with?

This ERT 420006 accessory kit is manufactured to fit its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.

How long does shipping take?

Orders ship nationwide to all 50 U.S. states. Standard delivery typically takes 3–7 business days depending on your location; expedited options are available at checkout. Full details are on our shipping policy page.

Is this a direct OE replacement?

Yes. The ERT 420006 is engineered to match the original equipment fitting hardware, so no modification is required for installation.

Do I need to replace this hardware every time I replace my brake pads?

Most brake manufacturers recommend replacing fitting hardware (shims, clips, springs) with every pad change, since worn hardware is a common cause of brake noise and uneven pad wear.

Related Parts and Resources

• Browse our full brake parts catalog
• ERT 420254 Brake Pad Accessory Kit
• NK 7930194 Brake Pad Accessory Kit
• AUTOFREN SEINSA D42855A Brake Pad Accessory Kit
• A.B.S. 1678Q Brake Pad Accessory Kit
• MAXGEAR 27-0555 Brake Pad Accessory Kit
• Warranty policy
• Shipping policy
• General FAQ
• About CG Auto Parts Shop

For general background on brake system design, see disc brake system design and components and NHTSA brake and chassis safety guidance.