MAXGEAR 23-0029 Brake Pad Wear Sensor

An illuminated brake wear warning light with plenty of pad material remaining, or no warning at all as pads wear thin, usually means the sensor itself has failed. The MAXGEAR 23-0029 warning contact replaces a faulty sensor with an OE-matched part.

Key Benefits

The MAXGEAR 23-0029 warning contact is manufactured to restore accurate pad wear monitoring. Here’s what this replacement part offers:

• MAXGEAR manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.
• Durable construction designed to withstand brake dust, heat, and moisture exposure over time.
• OE-matching fitment designed to connect directly to your vehicle’s existing wiring harness with no modification.
• Accurate wear detection engineered to MAXGEAR 23-0029’s original electrical and mechanical specifications.
• Straightforward installation using factory mounting points and connector types.
• Early warning protection that helps prevent costly rotor damage from pads worn down to metal-on-metal contact.

Product Specifications

Every MAXGEAR 23-0029 warning contact is manufactured to match OE electrical and dimensional specifications. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.

MAXGEAR is an aftermarket brand focused on precision-engineered brake sensor and hardware components manufactured to strict quality-control standards.

Use Cases and Applications

This warning contact is suited for addressing a stuck or malfunctioning brake wear warning light, replacing a sensor during pad service, and restoring accurate pad wear monitoring. Typical scenarios where drivers choose this part include:

• Replacing a sensor after the wear warning light stays on despite adequate remaining pad material.
• Restoring warning functionality after a sensor fails to alert at the expected wear point.
• Installing a new sensor alongside a brake pad replacement, as many manufacturers recommend.
• Addressing a sensor damaged during a previous brake service.

Because wear sensors are manufactured for a specific electrical connector and mounting configuration, this part is intended as a direct match for the applications it’s designed for — always confirm fitment against your vehicle’s OE part number before ordering. Keeping this sensor in good working order helps protect your rotors from the accelerated wear and damage that comes from driving on pads that are worn past their service life.

Quality Assurance and Certifications

MAXGEAR is an aftermarket brand focused on precision-engineered brake sensor and hardware components manufactured to strict quality-control standards. Each MAXGEAR 23-0029 unit undergoes manufacturer quality control testing for dimensional accuracy and material durability before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as disc brake system design and components.

Shipping and Delivery

We ship the MAXGEAR 23-0029 warning contact to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full brake parts shop for related components.

What Customers Are Saying

“”Simple fix for a warning light that wouldn’t go away. Would order again.” — Daniel, Akron, OH

“”My wear light finally turned off after replacing this sensor. Connector matched perfectly.” — Hannah, Baton Rouge, LA

Individual results may vary based on vehicle condition and installation quality.

Frequently Asked Questions

What symptoms indicate a failed wear sensor?

Common symptoms include a wear warning light that stays illuminated despite adequate pad material, or no warning at all as pads wear thin — either points to a sensor that needs replacement.

How long does shipping take?

Orders ship nationwide to all 50 U.S. states. Standard delivery typically takes 3–7 business days depending on your location; expedited options are available at checkout. Full details are on our shipping policy page.

Why does my brake wear warning light stay on even with new pads?

This usually indicates a failed wear sensor rather than a pad issue — the sensor circuit may be damaged or not resetting properly. Replacing the sensor typically resolves the issue.

Does this sensor come with a warranty?

Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.

Which fitting position does this sensor cover?

This part fits the following position(s): Rear Axle. Check the specifications table above and confirm against your vehicle’s OE part number before ordering.

Why is this part priced at $11.99?

Pricing reflects the MAXGEAR brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.

Can I install this sensor myself?

Experienced DIY mechanics can typically install a wear sensor at home, especially during a brake pad replacement when the wheel is already off. If you’re not comfortable working on your brake system, we recommend having it installed by a qualified technician.

Do you ship to my state?

Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.

What is the EAN for the MAXGEAR 23-0029?

EAN details for this brake pad wear sensor are listed in the specifications table above where available.

What vehicles is this warning contact compatible with?

This MAXGEAR 23-0029 warning contact is manufactured to fit its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.

What is your return policy on this part?

Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.

Related Parts and Resources

• Browse our full brake parts catalog
• MAXGEAR 20-0016 Brake Pad Wear Sensor
• MAXGEAR 23-0032 Brake Pad Wear Sensor
• MAXGEAR 23-0043 Brake Pad Wear Sensor
• MAXGEAR 20-0120 Brake Pad Wear Sensor
• MAXGEAR 20-0124 Brake Pad Wear Sensor
• Warranty policy
• Shipping policy
• General FAQ
• About CG Auto Parts Shop

For general background on brake system design, see disc brake system design and components and NHTSA brake and chassis safety guidance.