MAXGEAR 20-0016 Brake Pad Wear Sensor
$10.99
Fix a stuck wear light with the MAXGEAR 20-0016 warning contact. OE-matched fitment, ships to all 50 states.
An illuminated brake wear warning light with plenty of pad material remaining, or no warning at all as pads wear thin, usually means the sensor itself has failed. The MAXGEAR 20-0016 warning contact replaces a faulty sensor with an OE-matched part.
Key Benefits
The MAXGEAR 20-0016 warning contact is manufactured to restore accurate pad wear monitoring. Here’s what this replacement part offers:
- Accurate wear detection engineered to MAXGEAR 20-0016’s original electrical and mechanical specifications.
- Straightforward installation using factory mounting points and connector types.
- Early warning protection that helps prevent costly rotor damage from pads worn down to metal-on-metal contact.
- Durable construction designed to withstand brake dust, heat, and moisture exposure over time.
- MAXGEAR manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.
- OE-matching fitment designed to connect directly to your vehicle’s existing wiring harness with no modification.
Product Specifications
Every MAXGEAR 20-0016 warning contact is manufactured to match OE electrical and dimensional specifications. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.
| Brand | MAXGEAR |
| Manufacturer Part Number | 20-0016 |
| Fitting Position | Front Axle |
| EAN | 5907558563429 |
| Brake Type | Disc Brake |
| Length | 605 |
| Price (USD) | $10.99 |
MAXGEAR is an aftermarket brand focused on precision-engineered brake sensor and hardware components manufactured to strict quality-control standards.
Use Cases and Applications
This warning contact is suited for addressing a stuck or malfunctioning brake wear warning light, replacing a sensor during pad service, and restoring accurate pad wear monitoring. Typical scenarios where drivers choose this part include:
- Replacing a sensor after the wear warning light stays on despite adequate remaining pad material.
- Restoring warning functionality after a sensor fails to alert at the expected wear point.
- Installing a new sensor alongside a brake pad replacement, as many manufacturers recommend.
- Addressing a sensor damaged during a previous brake service.
Because wear sensors are manufactured for a specific electrical connector and mounting configuration, this part is intended as a direct match for the applications it’s designed for — always confirm fitment against your vehicle’s OE part number before ordering. Keeping this sensor in good working order helps protect your rotors from the accelerated wear and damage that comes from driving on pads that are worn past their service life.
Quality Assurance and Certifications
MAXGEAR is an aftermarket brand focused on precision-engineered brake sensor and hardware components manufactured to strict quality-control standards. Each MAXGEAR 20-0016 unit undergoes manufacturer quality control testing for dimensional accuracy and material durability before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as disc brake system design and components.
Shipping and Delivery
We ship the MAXGEAR 20-0016 warning contact to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full brake parts shop for related components.
What Customers Are Saying
“”My wear light finally turned off after replacing this sensor. Connector matched perfectly.” — Monica, Akron, OH
“”Installed during my brake pad job, works exactly as expected.” — Ethan, Tampa, FL
Individual results may vary based on vehicle condition and installation quality.
Frequently Asked Questions
What vehicles is this warning contact compatible with?
This MAXGEAR 20-0016 warning contact is manufactured to fit its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.
Why does my brake wear warning light stay on even with new pads?
This usually indicates a failed wear sensor rather than a pad issue — the sensor circuit may be damaged or not resetting properly. Replacing the sensor typically resolves the issue.
Which fitting position does this sensor cover?
This part fits the following position(s): Front Axle. Check the specifications table above and confirm against your vehicle’s OE part number before ordering.
Does this sensor come with a warranty?
Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.
What symptoms indicate a failed wear sensor?
Common symptoms include a wear warning light that stays illuminated despite adequate pad material, or no warning at all as pads wear thin — either points to a sensor that needs replacement.
Do you ship to my state?
Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.
Is this a direct OE replacement?
Yes. The MAXGEAR 20-0016 is engineered to match the connector type and mounting configuration of the original equipment sensor, so no modification is required for installation.
Can I install this sensor myself?
Experienced DIY mechanics can typically install a wear sensor at home, especially during a brake pad replacement when the wheel is already off. If you’re not comfortable working on your brake system, we recommend having it installed by a qualified technician.
Why is this part priced at $10.99?
Pricing reflects the MAXGEAR brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.
What is your return policy on this part?
Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.
What is the EAN for the MAXGEAR 20-0016?
The MAXGEAR 20-0016 carries EAN 5907558563429. You can use this number, along with your vehicle’s OE reference number, to confirm fitment before ordering.
Related Parts and Resources
- Browse our full brake parts catalog
- MAXGEAR 20-0123 Brake Pad Wear Sensor
- MAXGEAR 20-0119 Brake Pad Wear Sensor
- MAXGEAR 23-0043 Brake Pad Wear Sensor
- MAXGEAR 20-0125 Brake Pad Wear Sensor
- MAXGEAR 23-0044 Brake Pad Wear Sensor
- Warranty policy
- Shipping policy
- General FAQ
- About CG Auto Parts Shop
For general background on brake system design, see disc brake system design and components and NHTSA brake and chassis safety guidance.
| Fitting Position | Front Axle |
|---|
Only logged in customers who have purchased this product may leave a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.