BREMBO P 24 078 Brake Pad Set – Rear Axle

Squealing, grinding, or a soft brake pedal are all signs it’s time for new pads. The BREMBO P 24 078 brake pad set is a rear axle replacement engineered to restore consistent stopping power and pedal feel on U.S. roads.

Key Benefits

The BREMBO P 24 078 brake pad set is built to bring OE-level braking performance back to your vehicle. Here’s what you get:

• Reduced brake dust and noise where the design includes anti-squeal features such as chamfered edges or shims.
• Traceable manufacturing, identified by EAN 8020584060513 for accurate inventory and reordering.
• Compatible braking system design intended to work with the caliper type listed in the specifications table below.
• OE-matching dimensions, engineered to seat correctly in the caliper without modification.
• Consistent friction material formulated for predictable stopping power across a range of driving conditions.

Product Specifications

Every BREMBO P 24 078 brake pad set is manufactured to defined dimensional and performance tolerances. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.

Use Cases and Applications

Drivers typically order this brake pad set for scenarios such as:

• Replacing pads that have worn down to or below the manufacturer’s minimum thickness during a routine brake inspection.
• Addressing squealing, grinding, or a vibrating brake pedal traced back to worn friction material.
• Restoring even braking performance after a pre-purchase or annual safety inspection flags thin pads.
• Bundling a brake service with a rotor replacement or resurfacing for a complete axle brake job.

Because brake pads are matched to specific axle positions and caliper types, always confirm fitment before ordering rather than relying on visual similarity alone. If you’re not sure whether the BREMBO P 24 078 matches your specific caliper or trim level, our support team can help you verify fitment using your VIN or your vehicle’s original brake pad part number before you check out.

Manufacturing Quality

Brembo is an Italian brand widely known for OE and performance brake systems used across passenger, motorsport, and commercial vehicles. This P 24 078 brake pad set is positioned in our Premium tier, reflecting tighter manufacturing tolerances and friction materials chosen to match or exceed OE performance. Friction material and backing plates are manufactured and quality-checked to dimensional tolerances intended to match the original equipment parts they replace. Because brakes are a critical safety system, the National Highway Traffic Safety Administration (NHTSA) recommends following your owner’s manual service intervals and having brake components inspected regularly.

We list the EAN, dimensions, and compatible brake system information provided by BREMBO directly in the specifications table above so you can cross-check this P 24 078 brake pad set against your vehicle’s original part before ordering. Confirming caliper compatibility and axle position ahead of time helps avoid a return or exchange after installation has already begun.

Shipping and Delivery

We ship the BREMBO P 24 078 brake pad set to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days. Review full details on our shipping policy page, or browse our full brakes and chassis parts shop for related components.

Frequently Asked Questions

Do new brake pads need a bedding-in (break-in) procedure?

Yes. Most manufacturers recommend a bedding-in procedure — a series of moderate stops from speed followed by a cool-down period — to transfer an even layer of friction material onto the rotor surface. Skipping this step can lead to noise, uneven wear, or reduced initial stopping power.

Is this a direct OE replacement?

Yes. The BREMBO P 24 078 is engineered to match the fitment, mounting points, and performance characteristics of the original equipment brake pads, so no additional modification is required for installation.

Does this brake pad set come with a warranty?

Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.

What vehicles is this brake pad set compatible with?

This BREMBO P 24 078 brake pad set is manufactured to fit the rear axle of its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.

Do you ship to my state?

Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.

Why does the BREMBO P 24 078 cost $34.96?

Pricing reflects the BREMBO brand’s manufacturing quality, friction material, and Premium positioning relative to other brake pad sets in our catalog, while remaining competitive with comparable OE and aftermarket options.

How long does shipping take?

Orders ship nationwide to all 50 U.S. states. Standard delivery typically takes 3–7 business days depending on your location; expedited options are available at checkout. Full details are on our shipping policy page.

Does this brake pad set include a wear sensor?

Check the specifications table above under Wear Warning Contact. If your vehicle originally had a wear sensor, reuse your existing sensor or contact us to confirm whether one is included with this kit.

How do I know when my brake pads need replacing?

Common signs include a squealing or grinding noise, reduced stopping power, a brake pedal that feels soft or requires more travel, or visible friction material at or below roughly 3mm (1/8 inch) when inspected through the wheel spokes.

Should I replace brake pads and rotors together?

Not always. If your rotors are within specification (not scored, warped, or below minimum thickness), pads alone can often be replaced. Many technicians recommend inspecting rotor condition and thickness whenever pads are replaced, and resurfacing or replacing rotors if they show excessive wear or heat damage.

Can I install this brake pad set myself?

Brake pad replacement is a common DIY maintenance task for mechanically confident owners with basic hand tools, a C-clamp or caliper tool, and jack stands. If you’re not fully comfortable with brake work, we recommend having it installed by a certified technician, since braking is a critical safety system.

What is your return policy on this part?

Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.

Do I need to replace brake pads in pairs (both sides of the axle)?

Yes. Brake pads should always be replaced as a complete set on both sides of the same axle to maintain even braking force, pedal feel, and stopping distance.

Related Parts and Resources

• Browse our full brakes & chassis catalog
• Warranty policy
• Shipping policy
• General FAQ
• About CG Auto Parts Shop

For general brake safety guidance, see the Wikipedia overview of brake pad technology and the Wikipedia overview of disc brake systems.