A.B.S. 11028 Splash Panel
$20.99
Replace a rusted panel with the A.B.S. 11028 splash panel. OE-matched fitment, ships to all 50 states.
Rust, road salt, and flying debris take a toll on an exposed brake disc — which is exactly what the splash panel is designed to prevent. The A.B.S. 11028 splash panel replaces a corroded or damaged original panel with an OE-matched part built for long-term durability.
Key Benefits
The A.B.S. 11028 splash panel is manufactured to restore rotor protection and OE fitment. Here’s what this replacement part offers:
- Corrosion-resistant material designed to hold up to road salt, moisture, and temperature extremes across all climates.
- OE-matching fitment engineered to A.B.S. 11028’s exact mounting dimensions for a precise, direct-fit installation.
- Straightforward installation using factory mounting points, with no modification to the caliper, hub, or knuckle required.
- Improved brake system longevity by reducing the debris exposure that contributes to premature rotor and pad wear.
- Rotor protection that shields the brake disc from road debris, mud, and standing water, helping reduce uneven wear and corrosion.
- Precise axle-specific design, manufactured for the correct side and position so it bolts in without adjustment.
Product Specifications
Every A.B.S. 11028 splash panel is manufactured to precise dimensional tolerances to match OE mounting points. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.
| Brand | A.B.S. |
| Manufacturer Part Number | 11028 |
| Axle Position | Rear Axle Left |
| EAN | 8717109722857 |
| Material | Sheet Steel |
| For Brake Disc Diameter | 245 |
| Price (USD) | $20.99 |
A.B.S. is an aftermarket brand focused on precision-engineered body and brake components manufactured to strict quality-control standards.
Use Cases and Applications
This splash panel is suited for routine brake service, rust repair, and restoring rotor protection after an original panel has corroded or been damaged. Typical scenarios where drivers choose this part include:
- Replacing a rusted-through or cracked splash panel discovered during a brake job or rotation.
- Restoring OE rotor protection after off-road driving or exposure to heavy road salt.
- Addressing a rattling or scraping noise caused by a loose or damaged splash panel contacting the rotor.
- Completing a full brake system refresh alongside new pads, rotors, or calipers.
Because splash panels are manufactured for a specific axle position and side, this part is intended as a direct match for the axle position listed in the specifications — always confirm fitment against your vehicle’s OE part number and axle position before ordering. Replacing a damaged splash panel promptly helps prevent it from contacting and scoring the rotor surface, which can turn a low-cost repair into a more expensive one.
Quality Assurance and Certifications
A.B.S. is an aftermarket brand focused on precision-engineered body and brake components manufactured to strict quality-control standards. Each A.B.S. 11028 unit undergoes manufacturer quality control testing for dimensional accuracy and corrosion resistance before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as disc brake system design and components.
Shipping and Delivery
We ship the A.B.S. 11028 splash panel to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full brake parts shop for related components.
What Customers Are Saying
“”Easy install during my brake job. Would order from this shop again.” — Tyler, Omaha, NE
“”Matched the OE part exactly, bolt for bolt. Shipping to Charlotte took about 4 days.” — Owen, Charlotte, NC
Individual results may vary based on vehicle condition and installation quality.
Frequently Asked Questions
What symptoms indicate a damaged or failing splash panel?
Common symptoms include a rattling or scraping noise near the wheel (especially when turning), visible rust-through or cracking, and a splash panel that’s bent or contacting the rotor.
Which axle position does this splash panel fit?
The A.B.S. 11028 is manufactured for the Rear Axle Left position. Check the specifications table above and confirm against your vehicle’s OE part number before ordering.
What vehicles is this splash panel compatible with?
This A.B.S. 11028 splash panel is manufactured to fit its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.
Do I need to replace the splash panel in pairs?
The A.B.S. 11028 can generally be replaced individually on the side where it’s needed, unless your vehicle’s specific application requires a matched pair — check the specifications table above for axle position details.
Does this splash panel come with a warranty?
Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.
What is your return policy on this part?
Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.
Do you ship to my state?
Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.
Why is this part priced at $20.99?
Pricing reflects the A.B.S. brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.
Is this a direct OE replacement?
Yes. The A.B.S. 11028 is engineered to match the mounting points and dimensions of the original equipment splash panel, so no modification is required for installation.
How long does shipping take?
Orders ship nationwide to all 50 U.S. states. Standard delivery typically takes 3–7 business days depending on your location; expedited options are available at checkout. Full details are on our shipping policy page.
Can I install this splash panel myself?
Experienced DIY mechanics with basic tools can typically install a splash panel at home, especially when the wheel and rotor are already removed for other brake work. If you’re not comfortable working on your brake system, we recommend having it installed by a qualified technician.
Related Parts and Resources
- Browse our full brake parts catalog
- A.B.S. 11051 Splash Panel
- A.B.S. 11029 Splash Panel
- A.B.S. 11262 Splash Panel
- A.B.S. 11052 Splash Panel
- A.B.S. 11040 Splash Panel
- Warranty policy
- Shipping policy
- General FAQ
- About CG Auto Parts Shop
For general background on brake system design, see disc brake system design and components and NHTSA brake and chassis safety guidance.
| Axle Position | Rear Axle Left |
|---|
Only logged in customers who have purchased this product may leave a review.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.