BLUE PRINT ADM52342 Fuel Filter

Fuel system performance depends on a filter that can keep pace with your engine’s demands without restricting flow. The BLUE PRINT ADM52342 fuel filter is built to OE-matching tolerances, engineered to trap contaminants while maintaining the fuel pressure your engine needs for smooth operation.

Key Benefits

The BLUE PRINT ADM52342 fuel filter is manufactured to restore clean, consistent fuel delivery. Here’s what this replacement part offers:

• Straightforward installation designed to use factory mounting points and connections, with no additional modification required.
• OE-matching fitment engineered to match original mounting points and connection thread sizing for a direct-fit installation.
• Reduced risk of fuel starvation under load, helping maintain smooth acceleration and stable idle in stop-and-go traffic.
• BLUE PRINT manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.
• Corrosion-resistant housing designed to withstand fuel additives, moisture, and temperature swings across all 50 states.
• Protection for downstream components, helping extend the service life of fuel injectors and fuel pumps by reducing particulate wear.

Product Specifications

Every BLUE PRINT ADM52342 fuel filter is manufactured to tight dimensional and performance tolerances. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.

BLUE PRINT is an aftermarket brand focused on precision-engineered filtration components manufactured to strict quality-control standards.

Use Cases and Applications

This fuel filter is suited for routine fuel system maintenance, pre-inspection replacement, and restoring smooth engine performance after a clogged filter is diagnosed during a service visit. Typical scenarios where drivers choose this part include:

• Replacing a fuel filter at the manufacturer-recommended service interval to prevent fuel starvation.
• Restoring smooth idle and acceleration after experiencing hesitation, stalling, or reduced power.
• Preparing a vehicle for a long-distance road trip where fuel system reliability matters most.
• Addressing hard starts, rough idling, or poor fuel economy traced back to a restricted fuel filter.

Because it’s engineered for a specific fuel system configuration, this part is intended to be installed as a direct match for the applications it’s designed for — always confirm fitment against your vehicle’s OE part number before ordering. Drivers who stay ahead of the manufacturer-recommended replacement interval typically avoid the more expensive repairs that come with a neglected fuel system, including premature fuel pump failure and injector fouling.

Quality Assurance and Certifications

BLUE PRINT is an aftermarket brand focused on precision-engineered filtration components manufactured to strict quality-control standards. Each BLUE PRINT ADM52342 unit undergoes manufacturer quality control testing for filtration efficiency, flow rate, and dimensional accuracy before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by resources such as general fuel filter technology and design.

Shipping and Delivery

We ship the BLUE PRINT ADM52342 fuel filter to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full engine and filtration parts shop for related components.

What Customers Are Saying

“”My mechanic said this filter looked cleaner-built than the original. Engine runs smoother since I swapped it.” — Tyler, Reno, NV

“”Installed the BLUE PRINT ADM52342 and the rough idle I was chasing disappeared right away. Fit perfectly, no issues.” — Ethan, Spokane, WA

Individual results may vary based on vehicle condition, fuel quality, and installation quality.

Frequently Asked Questions

Why is this part priced at $11.99?

Pricing reflects the BLUE PRINT brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.

What vehicles is this fuel filter compatible with?

This BLUE PRINT ADM52342 fuel filter is manufactured to fit its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.

What is the EAN for the BLUE PRINT ADM52342?

The BLUE PRINT ADM52342 carries EAN 5050063523423. You can use this number, along with your vehicle’s OE reference number, to confirm fitment before ordering.

Does this fuel filter come with a warranty?

Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.

What type of fuel filter is this?

The BLUE PRINT ADM52342 is a spin-on filter fuel filter. See the specifications table above for full technical details.

Is this a direct OE replacement?

Yes. The BLUE PRINT ADM52342 is engineered to match the fitment, connection type, and filtration performance of the original equipment fuel filter, so no additional modification is required for installation.

How long does shipping take?

Orders ship nationwide to all 50 U.S. states. Standard delivery typically takes 3–7 business days depending on your location; expedited options are available at checkout. Full details are on our shipping policy page.

Can I install this fuel filter myself?

Experienced DIY mechanics with the correct tools can often complete this installation at home, particularly for inline filters. Spin-on and in-tank filters may require fuel system depressurization — if you’re unsure, we recommend having it installed by a certified technician.

Do you ship to my state?

Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.

What symptoms indicate a failing fuel filter?

Common symptoms include rough idling, hesitation or stumbling under acceleration, difficulty starting, reduced power, stalling, and in some cases reduced fuel economy. A severely clogged filter can eventually cause a no-start condition.

How often should a fuel filter be replaced?

Most manufacturers recommend replacing the fuel filter every 20,000–40,000 miles, though intervals vary by vehicle and fuel quality. Check your owner’s manual for the manufacturer-recommended interval.

Related Parts and Resources

• Browse our full engine & filtration catalog
• BLUE PRINT ADB112301 Fuel Filter
• BLUE PRINT ADV182304 Fuel Filter
• BLUE PRINT ADM52343 Fuel Filter
• MFILTER DF 328 Fuel Filter
• FEBI BILSTEIN 24073 Fuel Filter
• Warranty policy
• Shipping policy
• General FAQ
• About CG Auto Parts Shop

For general fuel system maintenance guidance, see general fuel filter technology and design and EPA guidance on fuel system maintenance and emissions.