Febest 1829-001 Camber Screw

If you’re shopping for a Febest 1829-001 camber correction screw, you’re looking at a direct-fit replacement part designed for the the applicable axle position. This camber correction screw allows precise adjustment of wheel camber angle, correcting alignment after suspension or subframe work. Worn, cracked, or missing suspension boots and buffers are a common cause of premature shock absorber failure, so replacing this part promptly protects the more expensive components around it. Shop this Febest 1829-001 now and have it on its way with nationwide shipping.

## Why This Camber Screw Matters

A suspension system is only as good as its smallest parts. The camber correction screw may be inexpensive compared to a full shock absorber or strut, but its job — keeping dirt, moisture, and road debris off the working parts of your suspension — has an outsized effect on how long those bigger, costlier components last. Here’s what this Febest 1829-001 brings to the job:

– **Direct-fit replacement** — manufactured to match the fitment of the original component for the applicable axle position
– **Protects surrounding components** — a camber screw in good condition helps the rest of the suspension assembly around it last longer
– **Straightforward installation** — designed to install using standard hand tools in a typical DIY suspension job
– **Reduces noise and harshness** — a properly fitted camber screw cuts down on clunks and rattles from worn suspension rubber
– **Backed by Febest** — an aftermarket manufacturer specializing in rubber, suspension, and steering components engineered for precise vehicle-specific fitment

Whether you’re doing routine preventive maintenance or replacing a part that’s already failed, installing a quality camber screw now is far cheaper than replacing a damaged shock absorber later.

## Specifications & Technical Details

This listing is for **Febest part number 1829-001**, categorized by the manufacturer as a camber correction screw for the **the applicable axle position**. Key specifications as provided by Febest:

| Attribute | Value |
|—|—|
| EAN | 4056111111957 |
| Brand class | Budget |
| Manufacturer | FEBEST |
| Manufacturer Part Number | 1829-001 |

EAN: **4056111111957** — use this number, alongside the part number, to cross-check fitment against your vehicle’s existing part before ordering.

Always confirm fitment against your vehicle’s VIN or your current part’s number where possible, since suspension components frequently vary by trim, chassis code, and production date even within the same model.

## Use Cases & Applications

This camber correction screw is most commonly installed during:

– **Shock absorber or strut replacement** — many installers replace the camber screw at the same time as the shock absorber itself, since both wear out on a similar timeline
– **Suspension noise diagnosis** — a torn or missing camber screw is a frequent source of clunking or rattling noises over bumps
– **Preventive maintenance** — replacing a cracked or perished camber screw before it fails protects the shock absorber rod from dirt and moisture ingress
– **Post-inspection repair** — if a routine inspection or state safety check flags a damaged suspension boot or buffer, this part addresses that finding directly

This part is relevant to drivers anywhere in the country — from winter road-salt conditions in the Northeast and Midwest to dusty, high-mileage driving in the Southwest — since contamination protection matters regardless of climate. We ship this camber screw to all 50 states.

## Quality & Sourcing

This part is supplied by **Febest**, an aftermarket manufacturer specializing in rubber, suspension, and steering components engineered for precise vehicle-specific fitment. The part number and EAN listed on this page correspond directly to Febest’s own catalog listing for this component, so you can cross-reference specifications directly with the manufacturer if needed.

As with any aftermarket suspension part, we recommend visually inspecting the part on arrival and confirming the part number matches your original component before installation. For more on our sourcing and quality standards, see our [About Us](https://cgautopartsshop.com/about-us/) page.

## Shipping & Delivery

We ship this Febest 1829-001 camber correction screw to customers in all 50 US states. Standard delivery typically takes 3-7 business days depending on your location, with faster options available at checkout. See our full [Shipping Policy](https://cgautopartsshop.com/shipping-policy/) for state-by-state delivery estimates and carrier information.

## Buying With Confidence

We list the manufacturer part number and EAN for every suspension component we carry so you can verify fitment before you buy, not after. If you’re unsure whether this camber screw matches your vehicle, our team is available through our [Contact Us](https://cgautopartsshop.com/contact-us/) page before you place an order. Full terms, including our return window for unused parts, are on our [Terms of Service](https://cgautopartsshop.com/terms-of-service/) page, and warranty information is on our [Warranty Policy](https://cgautopartsshop.com/warranty-policy/) page. Reviews for this listing will appear below as customers purchase and install this part.

## Frequently Asked Questions

### Do I need to replace the camber screw in pairs?

Most installers replace suspension boots, dust covers, and buffers on both sides of an axle at the same time, even if only one side has failed, since the opposite side is usually close behind in wear. Whether that applies to your vehicle depends on your specific inspection findings.

### What’s included with this camber screw?

This listing includes the camber correction screw itself as supplied by Febest, part number 1829-001. Some kits include additional small components such as retaining clips; check the fitting position and specifications listed above for this specific part.

### How long does shipping take?

Orders ship from our US warehouse network to all 50 states. Typical delivery is 3-7 business days depending on your location; expedited options are available at checkout. Full details are on our [Shipping Policy](https://cgautopartsshop.com/shipping-policy/) page.

### What’s your return policy on suspension parts?

We accept returns on unused, uninstalled parts in original packaging within the window described on our [Terms of Service](https://cgautopartsshop.com/terms-of-service/) page. Because this is a mechanical wear part, we recommend confirming fitment before installation.

### Is Febest a reliable brand for this type of part?

Febest is an aftermarket manufacturer specializing in rubber, suspension, and steering components engineered for precise vehicle-specific fitment. As with any aftermarket supplier, we recommend matching the exact part number and EAN to your vehicle’s requirements rather than relying on brand name alone.

### Can I install this myself, or do I need a mechanic?

Replacing a camber screw is a common DIY suspension job for someone comfortable working with jack stands, a spring compressor (where applicable), and basic hand tools. If you’re not confident working under a loaded suspension, we recommend having a qualified technician handle the installation.

### What signs indicate my old camber screw needs replacing?

Common signs include visible cracking, tearing, or perishing of the rubber, a clunking noise over bumps, or dirt/moisture visibly reaching the shock absorber rod. A torn dust cover or boot is often found during a routine suspension inspection.

### Does this part come with a warranty?

Manufacturer warranty terms vary by brand. Please see our [Warranty Policy](https://cgautopartsshop.com/warranty-policy/) page for full details, and keep your order confirmation as proof of purchase.

### What’s the difference between a dust cover kit and a protective bellow?

Both protect the shock absorber rod from contamination, but a dust cover kit is typically a rigid or semi-rigid sleeve, while a protective bellow (or boot) is a flexible, accordion-style rubber cover. The correct type is vehicle-specific and listed in the product title.

### Will this fit both the left and right side?

Fitting position for this part is listed above (the applicable axle position). Some parts are side-specific while others fit either side of the axle; check the listed fitting position or contact us at [Contact Us](https://cgautopartsshop.com/contact-us/) to confirm before ordering.

## Related Products & Resources

Often purchased alongside this part: [Febest 0229-006 Camber Screw](https://cgautopartsshop.com/product/febest-0229-006-camber-screw/), [Febest 1429-001-KIT Camber Screw](https://cgautopartsshop.com/product/febest-1429-001-kit-camber-screw/), [Febest 0129-015 Camber Screw](https://cgautopartsshop.com/product/febest-0129-015-camber-screw/), [Tedgum TED10943 Camber Screw](https://cgautopartsshop.com/product/tedgum-ted10943-camber-screw/). Browse the full [Camber Correction Kits](https://cgautopartsshop.com/product-category/camber-correction-kits/) category, or explore [Shop All Parts](https://cgautopartsshop.com/shop/).

For general background reading, see [shock absorber](https://en.wikipedia.org/wiki/Shock_absorber) and [NHTSA vehicle safety information](https://www.nhtsa.gov/).