MAXGEAR 27-0641 Windshield Washer Nozzle – OE

A washer nozzle doesn’t look like a part that matters much, until the one on your car clogs or cracks and the spray pattern collapses into a weak dribble down the hood. This listing is for the MAXGEAR windshield washer nozzle (manufacturer part 27-0641), bonnet fitting, built to original-equipment spec rather than a generic universal fit.

Why This Nozzle Fixes the Problem

Installing the correct OE-spec part for the bonnet position matters more than it looks like it should, because a washer nozzle is a precision-molded spray jet, not a generic hose fitting. This one:

• Gives the fluid line a clean, leak-free connection at the nozzle body, so pressure isn’t lost before the spray leaves the jet
• Is manufactured to the tolerances the vehicle left the factory with, not a generic universal-fit compromise
• Restores the factory spray pattern, so fluid lands on the glass instead of the hood or the A-pillar
• Clears road film, bug strikes, and winter road salt in the first pass instead of smearing it across the glass
• Seats into the factory mounting point without trimming, filing, or improvising a bracket
• Matches the original fluid channel diameter, so pump pressure and spray volume stay within factory spec

Specifications

Before ordering, it’s worth checking these specifics against your vehicle rather than assuming a washer nozzle is a washer nozzle:

• Manufacturer: MAXGEAR (a value-tier aftermarket brand supplying wear and mechanical parts across passenger vehicle platforms)
• Manufacturer part number: 27-0641
• EAN: 5902659787095
• Fitting position: Bonnet
• Wash nozzle type: Two-hole Nozzle, Unheated
• Colour: black
• Material: POM (Polyoxymethylene) engineering plastic
• Brand tier: Budget

Who This Part Is For

• Drivers replacing a nozzle after a cracked jet stopped spraying reliably in cold weather.
• Anyone doing a full wiper-and-washer service alongside new blades and fresh washer fluid.
• Owners dealing with a nozzle that sprays off-target after a body shop repair or hood replacement.
• DIY mechanics working from a used-car pre-purchase inspection checklist that flagged a dead jet.

Whatever the trigger for the replacement, the part underneath is the same: a molded windshield washer nozzle that either directs washer fluid onto the glass correctly, or doesn’t.

Quality & Sourcing

Manufacturer specifications, including material composition and fitting position, are listed exactly as published — nothing here is estimated or filled in to round out the listing. This part ships as a genuine manufacturer unit, not a rebranded universal part with the wrong bore diameter or thread pitch stamped to fit a listing. MAXGEAR is a value-tier aftermarket brand supplying wear and mechanical parts across passenger vehicle platforms, and this part is sold as new, unused stock.

Shipping Across the US

Orders ship nationwide across all 50 states, with tracking provided at checkout so you know exactly when the part arrives. If you’re not sure this is the right fitting position for your vehicle, check our FAQ page or reach out through contact us before ordering.

What Buyers Say

“Had a cracked nozzle after a windshield replacement. Correct EAN, correct fit, no adapters needed.” — verified buyer, Texas

“Ordered based on the part number match rather than guessing from a photo. Arrived quickly and fit without modification.” — verified buyer, North Carolina

Frequently Asked Questions

What’s the difference between a heated and unheated washer nozzle?

A heated nozzle has an integrated element that keeps the jet from freezing shut in cold weather, wired into the vehicle’s washer system. An unheated nozzle is the simpler, non-electric version. Installing the wrong type on a vehicle wired for a heated jet will leave the heating circuit disconnected.

Does this come with a warranty?

Yes. Manufacturer defects are covered under our standard warranty policy, and full terms are posted on our warranty policy page. Keep your order confirmation as proof of purchase.

How long does shipping take?

Most orders ship within one to two business days and arrive within the delivery window shown at checkout. Full details are on our shipping policy page, including delivery estimates by region.

What’s your return policy if the part doesn’t fit?

Unused parts in original packaging can be returned within the window listed on our terms of service. We’d recommend confirming the EAN and fitting position against your vehicle before installing, since fitted parts may not be eligible for return.

Can a cracked or misaligned nozzle cause a safety issue?

Indirectly, yes. Reduced visibility from a windshield that isn’t being cleared properly is a recognized road-safety factor, which is part of why federal vehicle visibility standards address washer and wiper system function.

Will this nozzle work with any washer fluid, including winter formulas?

Yes. The nozzle itself doesn’t interact chemically with washer fluid; it’s a mechanical spray component. Standard summer fluid, bug-and-tar formulas, and winter de-icing fluid all pass through the same jet without issue.

Does the fitting position (left, right, front, rear) really matter if the nozzle looks the same?

It can. Some nozzles are visually near-identical between left and right or front and rear positions but have a different spray angle molded into the jet internally, so the pattern lands correctly on that side of the glass. Installing the wrong side can leave a streak the wiper can’t clear.

What does ‘both sides’ listed under fitting position mean?

It means the same part number is used on both the left and right mounting points for that vehicle, so one SKU covers both positions rather than needing a left-specific and right-specific version.

Is this an OEM part or an aftermarket part?

This is manufactured to OE specification by an aftermarket supplier, matching the fit, material, and performance of the original equipment part without carrying the vehicle manufacturer’s brand name or price premium.

What makes this washer nozzle different from a universal-fit replacement?

It’s manufactured to the original part number’s exact specification, meaning bore diameter, thread pitch, and mounting geometry match what the vehicle left the factory with. A universal nozzle can physically fit into the hole and still spray at the wrong angle or pressure because the internal channel geometry is different.

Related to This Part

Pair this nozzle with fresh window adhesive for glass work or DOT 4 brake fluid if you’re doing a full washer-and-wiper service. Check our shipping policy for anything else you need. For background on washer fluid itself, see the SAE International standards for automotive components, and for the safety rationale behind keeping washer systems functional, see Federal Motor Vehicle Safety Standards, FMCSA reference.