MAXGEAR 27-0748 Windshield Washer Nozzle – Rear – OE

There’s a specific kind of frustration that comes from hitting the washer stalk on the highway and watching fluid go everywhere except the windshield. This listing is for the MAXGEAR windshield washer nozzle (manufacturer part 27-0748), rear fitting, built to original-equipment spec rather than a generic universal fit.

Why This Nozzle Fixes the Problem

Installing the correct OE-spec part for the rear position matters more than it looks like it should, because a washer nozzle is a precision-molded spray jet, not a generic hose fitting. This one:

• Keeps the wiper blades running on clean glass, which slows the rate at which the blade edges pick up grit and wear unevenly
• Closes the gap between a working washer pump and a windshield that actually gets cleaned
• Avoids the drip-and-dribble spray pattern that a partially clogged or cracked nozzle produces
• Gives the fluid line a clean, leak-free connection at the nozzle body, so pressure isn’t lost before the spray leaves the jet
• Is manufactured to the tolerances the vehicle left the factory with, not a generic universal-fit compromise
• Restores the factory spray pattern, so fluid lands on the glass instead of the hood or the A-pillar

Specifications

This is the exact specification sheet for this part, not a rounded-off approximation:

• Manufacturer: MAXGEAR (a value-tier aftermarket brand supplying wear and mechanical parts across passenger vehicle platforms)
• Manufacturer part number: 27-0748
• EAN: 5903364320003
• Fitting position: Rear
• Colour: black
• Material: POM (Polyoxymethylene) engineering plastic
• Brand tier: Budget

Who This Part Is For

• Anyone doing a full wiper-and-washer service alongside new blades and fresh washer fluid.
• Owners dealing with a nozzle that sprays off-target after a body shop repair or hood replacement.
• DIY mechanics working from a used-car pre-purchase inspection checklist that flagged a dead jet.
• Fleet and shop technicians stocking OE-spec replacements for routine washer system service.

Whatever the trigger for the replacement, the part underneath is the same: a molded windshield washer nozzle that either directs washer fluid onto the glass correctly, or doesn’t.

Quality & Sourcing

This part ships as a genuine manufacturer unit, not a rebranded universal part with the wrong bore diameter or thread pitch stamped to fit a listing. The EAN and part number below are traceable to the manufacturer’s own catalog, which is the fastest way to confirm this is the correct nozzle for your VIN before you order. MAXGEAR is a value-tier aftermarket brand supplying wear and mechanical parts across passenger vehicle platforms, and this part is sold as new, unused stock.

Shipping Across the US

We ship to addresses in every US state, and the order confirmation includes tracking so you’re not guessing at delivery timing. If you’re not sure this is the right fitting position for your vehicle, check our FAQ page or reach out through contact us before ordering.

What Buyers Say

“Ordered based on the part number match rather than guessing from a photo. Arrived quickly and fit without modification.” — verified buyer, North Carolina

“The heated nozzle cleared ice buildup in about the same time as the factory part it replaced.” — verified buyer, Minnesota

Frequently Asked Questions

Does this come with a warranty?

Yes. Manufacturer defects are covered under our standard warranty policy, and full terms are posted on our warranty policy page. Keep your order confirmation as proof of purchase.

How long does shipping take?

Most orders ship within one to two business days and arrive within the delivery window shown at checkout. Full details are on our shipping policy page, including delivery estimates by region.

What’s your return policy if the part doesn’t fit?

Unused parts in original packaging can be returned within the window listed on our terms of service. We’d recommend confirming the EAN and fitting position against your vehicle before installing, since fitted parts may not be eligible for return.

Can a cracked or misaligned nozzle cause a safety issue?

Indirectly, yes. Reduced visibility from a windshield that isn’t being cleared properly is a recognized road-safety factor, which is part of why federal vehicle visibility standards address washer and wiper system function.

Will this nozzle work with any washer fluid, including winter formulas?

Yes. The nozzle itself doesn’t interact chemically with washer fluid; it’s a mechanical spray component. Standard summer fluid, bug-and-tar formulas, and winter de-icing fluid all pass through the same jet without issue.

Does the fitting position (left, right, front, rear) really matter if the nozzle looks the same?

It can. Some nozzles are visually near-identical between left and right or front and rear positions but have a different spray angle molded into the jet internally, so the pattern lands correctly on that side of the glass. Installing the wrong side can leave a streak the wiper can’t clear.

What does ‘both sides’ listed under fitting position mean?

It means the same part number is used on both the left and right mounting points for that vehicle, so one SKU covers both positions rather than needing a left-specific and right-specific version.

Is this an OEM part or an aftermarket part?

This is manufactured to OE specification by an aftermarket supplier, matching the fit, material, and performance of the original equipment part without carrying the vehicle manufacturer’s brand name or price premium.

What makes this washer nozzle different from a universal-fit replacement?

It’s manufactured to the original part number’s exact specification, meaning bore diameter, thread pitch, and mounting geometry match what the vehicle left the factory with. A universal nozzle can physically fit into the hole and still spray at the wrong angle or pressure because the internal channel geometry is different.

How do I confirm this is the right nozzle for my vehicle?

Match the EAN or manufacturer part number listed against your old nozzle, or check it against your vehicle’s parts catalog by VIN. Fitting position (front, rear, left, right, or both sides) also has to match, since washer systems on many vehicles use different nozzles for each location.

Related to This Part

Pair this nozzle with fresh DOT 4 brake fluid or wiper blades if you’re doing a full washer-and-wiper service. Check our FAQ page for anything else you need. For background on washer fluid itself, see the Federal Motor Vehicle Safety Standards, FMCSA reference, and for the safety rationale behind keeping washer systems functional, see Windshield washer fluid overview, Wikipedia.