DENCKERMANN DSB247G Shock Absorber – Front Axle Left

If your vehicle is bouncing over bumps, diving under braking, or wandering at highway speed, a worn shock absorber is often the root cause. The DENCKERMANN DSB247G shock absorber is a budget-friendly, value-engineered replacement part engineered for the front axle, left side, restoring the damping control your suspension needs for confident handling, shorter stopping distances, and a smoother ride on U.S. roads from coast to coast.

Key Benefits

The DENCKERMANN DSB247G shock absorber is built to bring OE-level ride control back to your vehicle. Here’s what you get with this budget-friendly, value-engineered replacement part:

• Consistent damping control using gas pressure technology for predictable handling in daily driving and emergency maneuvers.
• Suspension Strut construction engineered to match OE mounting points and travel specifications for a direct-fit installation.
• Reduced body roll and nose-dive under cornering and braking, improving overall vehicle stability.
• Improved tire contact and wear patterns by keeping the tire firmly planted on uneven pavement.
• Corrosion-resistant housing designed to withstand road salt, moisture, and temperature swings across all 50 states.
• DENCKERMANN manufacturing standards, backed by a standard parts warranty against defects in material and workmanship.

Product Specifications

Every DENCKERMANN DSB247G shock absorber is manufactured to tight dimensional and performance tolerances. Full technical details are listed below; always verify fitment against your vehicle’s VIN before ordering.

Denckermann is a German-managed aftermarket brand supplying chassis and suspension parts manufactured to strict OE-equivalent quality control standards.

Use Cases and Applications

This front axle, left side shock absorber is suited for routine suspension maintenance, pre-inspection replacement, and restoring ride quality after a failed shock is diagnosed during an alignment or safety inspection. Typical scenarios where drivers choose this part include:

• Replacing a leaking or bottoming-out shock absorber identified during a routine service visit.
• Restoring even ride height and handling after one shock fails while the opposite side is still serviceable.
• Preparing a vehicle for a long-distance road trip or towing season where suspension reliability matters most.
• Addressing excessive cabin vibration, clunking noises, or uneven tire wear traced back to worn damping components.

Because it’s engineered for front axle, left side applications, this part is intended to be installed as a direct axle-position match — not interchanged with the opposite end of the vehicle.

Quality Assurance and Certifications

Denckermann is a German-managed aftermarket brand supplying chassis and suspension parts manufactured to strict OE-equivalent quality control standards. Each DENCKERMANN DSB247G unit undergoes manufacturer quality control testing for leak resistance, damping consistency, and dimensional accuracy before leaving the factory. Materials and manufacturing processes are designed to meet automotive industry durability benchmarks referenced by organizations such as the National Highway Traffic Safety Administration (NHTSA), which publishes vehicle safety and suspension inspection guidance for U.S. drivers.

Shipping and Delivery

We ship the DENCKERMANN DSB247G shock absorber to all 50 U.S. states with tracked, insured delivery. Most orders leave our warehouse within 1–2 business days and arrive within 3–7 business days depending on destination. Review full details on our shipping policy page, or browse our full suspension and chassis parts shop for related components.

What Customers Are Saying

“I replaced both rear shocks with the DENCKERMANN DSB247G and the difference in ride quality was immediate — no more bouncing over expansion joints.” — Rachel, Portland, OR

“Fit was exact, no modification needed. Shipping to CO took about five days.” — Brian, Denver, CO

Individual results may vary based on vehicle condition, driving style, and installation quality.

Frequently Asked Questions

What vehicles is this shock absorber compatible with?

This DENCKERMANN DSB247G shock absorber is manufactured to fit the front axle, left side of its specified applications. Always cross-reference your vehicle’s VIN or OE part number against our fitment guide, or contact our support team through the contact page before ordering to confirm compatibility.

Is this a direct OE replacement?

Yes. The DENCKERMANN DSB247G is engineered to match the fitment, mounting points, and performance characteristics of the original equipment shock absorber, so no additional modification is required for installation.

What shock absorber type and design does this part use?

See the specifications table above for the exact type and design (for example, gas-pressure monotube or twin-tube telescopic construction), which affects ride comfort and load-handling characteristics.

Do I need to replace shock absorbers in pairs?

Most suspension technicians and OE manufacturers recommend replacing shock absorbers on the same axle in pairs to maintain even handling, braking stability, and tire wear on both sides of the vehicle.

How long does shipping take?

Orders ship nationwide to all 50 U.S. states. Standard delivery typically takes 3–7 business days depending on your location; expedited options are available at checkout. Full details are on our shipping policy page.

What is your return policy on this part?

Unused parts in original packaging can be returned within our standard return window. Review the complete terms on our warranty policy page or reach out via our contact page.

Does this shock absorber come with a warranty?

Yes, this part is covered by the manufacturer’s standard warranty against defects in material and workmanship. Warranty terms are outlined on our warranty policy page.

How much does professional installation typically cost?

Labor costs vary by shop and region, but shock absorber replacement is a routine suspension service most licensed repair shops can complete in under an hour per axle. We recommend having alignment checked after installation.

Can I install this shock absorber myself?

Experienced DIY mechanics with the correct tools (including a spring compressor if replacing a strut assembly) can often complete this installation at home. If you are unsure, we recommend having it installed by a certified technician.

Why is this part priced at $41.99?

Pricing reflects the DENCKERMANN brand’s manufacturing quality, materials, and engineering tier relative to other options in our catalog, while remaining competitive with comparable OE and aftermarket parts.

Will this part trigger any warning lights or ride-quality issues if left unreplaced?

Worn shock absorbers don’t usually trigger a dashboard warning, but symptoms include excessive bouncing, nose-diving under braking, uneven tire wear, and longer stopping distances. Replacing worn units restores predictable handling and braking performance.

Do you ship to my state?

Yes, we ship to all 50 U.S. states with tracked, insured shipping on every order.

Related Parts and Resources

• Browse our full suspension & chassis catalog
• Warranty policy
• Shipping policy
• General FAQ
• About CG Auto Parts Shop

For general suspension maintenance guidance, the Wikipedia overview of shock absorber technology and the Federal Motor Carrier Safety Administration both publish helpful reference material on vehicle suspension safety.